SC430 wheel fitment
02-19-12, 08:30 PM
#211
FYI Everyone,
I just installed some rims with 10.5 Wide +39 with 295/30-20 tires in the rear they're flush with the fender when looking under the car I still have at least another inch of space for tire width.
My my calcs,...
1. If I upgrade to an 11 inch rim that would need to be offset by 6mm so It would need a 46 offset to stay flush.
2. If I have an inch of space on the inside I can upgrade my tires by 20mm.
3. If I widen tires by 20mm to 315/25-20 I would have to offset the 20mm by half to stay flush so final offset would be +56.
Have I missed anything in my calcs?
I just installed some rims with 10.5 Wide +39 with 295/30-20 tires in the rear they're flush with the fender when looking under the car I still have at least another inch of space for tire width.
My my calcs,...
1. If I upgrade to an 11 inch rim that would need to be offset by 6mm so It would need a 46 offset to stay flush.
2. If I have an inch of space on the inside I can upgrade my tires by 20mm.
3. If I widen tires by 20mm to 315/25-20 I would have to offset the 20mm by half to stay flush so final offset would be +56.
Have I missed anything in my calcs?
Last edited by braheem; 02-22-12 at 12:50 PM.
The following users liked this post:
rakish1 (04-11-21)
04-03-12, 04:32 PM
#217
Lead Lap
Join Date: Mar 2012
Location: PA
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
I had a wheel crack which had the run-flats. Is this a problem with them? I've only had the car 1 week. 03 sc430 ( Added note; I had two cracked rims with run-flats on! Opposing sides.}
Last edited by barncat; 04-23-12 at 03:05 PM.
04-04-12, 03:33 AM
#218
Help needed guys..
I have been looking at a set of CE28N Volk Racing wheels for my 2010 SC.. The spec's offered are:-
Front Wheels:- 19x9.5 - +12, +22, +25, +36, +45
Rear Wheels:- 19x10.5 - +12, +22 +36
What would be the closest setting to flush i can reach without rubbing? I intend on lowering the car with Coilovers soon.. Due to the nature of our roads, i wont be lowering too much, maybe and inch give or take.
Secondly, What tires should i go with, 245/35-19 - 275/30-19 or 255/35-19 - 285/30-19?
Thanks,
Moe
I have been looking at a set of CE28N Volk Racing wheels for my 2010 SC.. The spec's offered are:-
Front Wheels:- 19x9.5 - +12, +22, +25, +36, +45
Rear Wheels:- 19x10.5 - +12, +22 +36
What would be the closest setting to flush i can reach without rubbing? I intend on lowering the car with Coilovers soon.. Due to the nature of our roads, i wont be lowering too much, maybe and inch give or take.
Secondly, What tires should i go with, 245/35-19 - 275/30-19 or 255/35-19 - 285/30-19?
Thanks,
Moe
In addition to the CE28Ns.. I have also been looking at the CCW Classics
https://www.clublexus.com/forums/sc-...-an-sc430.html
Thanks,
Moe
04-07-12, 02:00 AM
#220
Nice is this going to be aggressive enough or is it still going to tuck a few inches into the fender.. i really like the design of the 2010 SC wheels but they're damn offset is a disaster and i hate spacers.. i wanna get wheels asap to get rid of the spacers
Thanks
Moe
Thanks
Moe
04-07-12, 07:03 AM
#221
Ya Hamada, If you're doing 245 or less front go with +25 front, the back must be 295 to 315 to be flush. Quit stressing i did 2 months of research for my setup it will be a clean factory looking M3 looking setup, the way it should have been from the beginning.
Ibrahim
Ibrahim
04-18-12, 11:54 AM
#222
Rookie
Join Date: Apr 2012
Location: wa
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
I try on yesterday.
