SC430 wheel fitment
#153
Really nice. Black is a classic color.
#154
Spacers
I think a good outlook for SC owners looking to get the perfect fit for their aftermarket setup is for members who know a lot about this topic to post a chart stating what size spacers are needed given the set up stats.
Ex.
Vehicle Model SC430
Wheel Diameter (F) 19 (R) 19
Wheel Width (F) 8 (R) 8
Offset (F) 45 (R) 45
Spacer Width Needed for alignment just under fender :
(F) ?mm (R) ?mm
Thoughts???
Ex.
Vehicle Model SC430
Wheel Diameter (F) 19 (R) 19
Wheel Width (F) 8 (R) 8
Offset (F) 45 (R) 45
Spacer Width Needed for alignment just under fender :
(F) ?mm (R) ?mm
Thoughts???
#155
Plus 2 ^^ I still need to know what spacers to use.
#157
It's not exact....Looking at the illustration it says 8 inch width + 45 offset 33mm to 0mm. That tells me that I can purchase spacers anywhere between 33mm to 0mm.
I was looking for exact measurements from just inside the fender of an SC430 front and rear. The illustration doesn't do that.
I was looking for exact measurements from just inside the fender of an SC430 front and rear. The illustration doesn't do that.
#158
Exactly what I want!!!!! What offset can I archive that or close to the above!!
I'm thinking going 19x9.5 with 255/35 all around but available offset are only 25mm or 40mm
Link of the wheel
Will the 40mm be fine? Cuz according to the chart, 40mm on a 9.5" is like putting a 23mm spacer to the stock. I really want to get something close to that picture above!!
Last edited by grabber2; 01-20-11 at 03:04 PM.
#159
I love the look of that offset. Nice.
#160
talwang
430sc how will the Front 18x9 +35
Rear 18x10 +38
how will this setup work?
245x40x18 Front
265x40x18 Rear
Regards
430sc how will the Front 18x9 +35
Rear 18x10 +38
how will this setup work?
245x40x18 Front
265x40x18 Rear
Regards
Last edited by bacardi; 01-26-11 at 08:08 PM.
#161
According to the chart, the result of the following setup is:
Conservative:
Front - 19 x 8.5 offset 35mm (stick out 16mm vs factory)
Rear - 19 x 9.5 offset 40mm (stick out 24mm vs factory)
Aggressive: (btw - vendor states this setup won't fit the sc430??)
Front - 19 x 8.5 offset 20mm (stick out 31mm vs factory)
Rear - 19 x 9.5 offset 25mm (stick out 39mm vs factory)
If I use F: 235/40/R19 & R: 265/35/R19, would it rub if before lower & after lower 1.5"~2" ??????
I don't want to put 245/35 & 285/30 due to too thin for pole holes in NYC.....
my second option is 19 x 9.5 offset 25mm all around with 255/35/R19 <-- see member with this setup and looks good
Conservative:
Front - 19 x 8.5 offset 35mm (stick out 16mm vs factory)
Rear - 19 x 9.5 offset 40mm (stick out 24mm vs factory)
Aggressive: (btw - vendor states this setup won't fit the sc430??)
Front - 19 x 8.5 offset 20mm (stick out 31mm vs factory)
Rear - 19 x 9.5 offset 25mm (stick out 39mm vs factory)
If I use F: 235/40/R19 & R: 265/35/R19, would it rub if before lower & after lower 1.5"~2" ??????
I don't want to put 245/35 & 285/30 due to too thin for pole holes in NYC.....
my second option is 19 x 9.5 offset 25mm all around with 255/35/R19 <-- see member with this setup and looks good
Last edited by grabber2; 02-22-11 at 01:56 PM.
The following users liked this post:
TitanG545 (07-14-20)
#162
Driver School Candidate
Car has been sold...
I recently sold my car, but kept the wheels. If you like them, they can be bought for easy money on ebay right now... check them out!
http://cgi.ebay.com/ebaymotors/ws/eB...%3AMESELX%3AIT
http://cgi.ebay.com/ebaymotors/ws/eB...%3AMESELX%3AIT
Last edited by Gixxerboy6; 02-25-11 at 02:00 PM.
#163
Driver School Candidate
[ATTACH][/ATTACH]
This setup will absolutely fit without any rubbing issues using the stock suspension settings ...even if you go to 20"
According to the chart, the result of the following setup is:
Conservative:
Front - 19 x 8.5 offset 35mm (stick out 16mm vs factory)
Rear - 19 x 9.5 offset 40mm (stick out 24mm vs factory)
Aggressive: (btw - vendor states this setup won't fit the sc430??)
Front - 19 x 8.5 offset 20mm (stick out 31mm vs factory)
Rear - 19 x 9.5 offset 25mm (stick out 39mm vs factory)
If I use F: 235/40/R19 & R: 265/35/R19, would it rub if before lower & after lower 1.5"~2" ??????
I don't want to put 245/35 & 285/30 due to too thin for pole holes in NYC.....
my second option is 19 x 9.5 offset 25mm all around with 255/35/R19 <-- see member with this setup and looks good
Conservative:
Front - 19 x 8.5 offset 35mm (stick out 16mm vs factory)
Rear - 19 x 9.5 offset 40mm (stick out 24mm vs factory)
Aggressive: (btw - vendor states this setup won't fit the sc430??)
Front - 19 x 8.5 offset 20mm (stick out 31mm vs factory)
Rear - 19 x 9.5 offset 25mm (stick out 39mm vs factory)
If I use F: 235/40/R19 & R: 265/35/R19, would it rub if before lower & after lower 1.5"~2" ??????
I don't want to put 245/35 & 285/30 due to too thin for pole holes in NYC.....
my second option is 19 x 9.5 offset 25mm all around with 255/35/R19 <-- see member with this setup and looks good
Last edited by Gixxerboy6; 02-25-11 at 01:59 PM. Reason: repeated information
#164
Ballain what kind of rims do you have now? Twisters? Pie plates?
#165
My wheel setup
Pretty darn conservative at stock height.
20X 8.5 front - 235/35 ZR20 TOYO Proxes
20 X 10.0 rear - 275/30 ZR20 TOYO Proxes
Will go with 285/30 ZR20 on rear when time to replace tires.
20X 8.5 front - 235/35 ZR20 TOYO Proxes
20 X 10.0 rear - 275/30 ZR20 TOYO Proxes
Will go with 285/30 ZR20 on rear when time to replace tires.
Last edited by a1is4bits; 03-05-11 at 04:48 PM. Reason: spelling, added pictures
The following users liked this post:
TitanG545 (07-14-20)