When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
It mounts to the back of the wood trim piece. I am guessing at a minimum you would need to remove the glove box assembly and reach behind the wood trim to undo the hardware. Same thing with the center vent. Kinda a pain in the ***.
I need a driver side door actuator. My SC is a 400, not sure if they're the same as the SC300.
DM me, I can get one from my junkyard for around 30 bucks but it's a ***** to take off and one of the bolts for the window rail is stripped so getting it out at this point is almost impossible.
I need a driver side door actuator. My SC is a 400, not sure if they're the same as the SC300.
DM me, I can get one from my junkyard for around 30 bucks but it's a ***** to take off and one of the bolts for the window rail is stripped so getting it out at this point is almost impossible.
03-22-17, 10:03 AM
