Looking for ECM 😩
#1
Driver School Candidate
Thread Starter
Join Date: Jan 2015
Location: Alabama
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Looking for ECM 😩
Was driving home today and suddenly my SC decides to kick down out of OD. Tried to juice it a little bit to see if I could get it to kick back into OD, but to no avail nothing. Has done this before and after strenuous research through past posts & forums, it sounds to be leaking capacitors in the ECM. If anyone at all has a spare ECM they'd like to get rid of please let me know as this is my daily driver and I love this car to death. It's a '95 SC300 A/T Federal Emission 2JZGE
Thanks in advance guys!
Thanks in advance guys!
#2
Moderator
iTrader: (5)
To help, 93SC400LEX, you will need this ECU P/N for your car:
89661-24313 — 1995 SC300 A/T Federal
https://www.clublexus.com/forums/per...s-by-year.html
Have you tried searching for this P/N on eBay just in case? Worst case scenario if you are in a real bind, contact Tanin Auto Electronix. They repair our ECUs but sometimes they are also able to locate the right replacement ECU for your car if needed. You'd still want to get any replacement ECU's capacitors serviced anyway-- even any in remaining old stock from Toyota. Or at least have your original ECU checked during capacitor repair to determine if it can be saved or not.
I hope you can locate one in reasonable time! Good luck!
89661-24313 — 1995 SC300 A/T Federal
https://www.clublexus.com/forums/per...s-by-year.html
Have you tried searching for this P/N on eBay just in case? Worst case scenario if you are in a real bind, contact Tanin Auto Electronix. They repair our ECUs but sometimes they are also able to locate the right replacement ECU for your car if needed. You'd still want to get any replacement ECU's capacitors serviced anyway-- even any in remaining old stock from Toyota. Or at least have your original ECU checked during capacitor repair to determine if it can be saved or not.
I hope you can locate one in reasonable time! Good luck!
Thread
Thread Starter
Forum
Replies
Last Post
ScubaSC300
Performance & Maintenance
1
12-08-18 09:20 PM