MD Brand New Performance Parts
#1
gte & na-t
Thread Starter
iTrader: (44)
Join Date: Jan 2007
Location: Maryland /Germantown
Posts: 5,139
Likes: 0
Received 7 Likes
on
7 Posts
Brand New Performance Parts
Changed of plans one more time so these have to go.I am pricing these as low as possible and you can't get them cheaper anywhere.
GSC S2
GSC Power-Division S2 cams for the Toyota Supra 2JZ-GTE. The S2 cams are designed for those running a large single turbo, larger than 71mm. These cams will not have bottom end losses over our S1 cams; nothing but gains will be seen and will promote great peak power gains. Gains of 60-100whp (depending on Turbo) have been seen by simply bolting the S2 cams in and reshimming. Designed for a rev range of 4000-8500rpms, these cams require upgraded valve spring, but can be run on stock cylinder heads. 800-1100whp camshaft set with a ruffer than stock idle.
S2 Specs gsc-6030S2
Intake 274 Duration 10.20mm peak lift, 109 degree Centerline
Exhaust 274 Duration 10.20mm Peak Lift, 119 degree Centerline
775 SHIPPED I will throw in a set of GSC Valve stem seals brand new in the box.
Titan Billet tensioner $250 with Kevlar Blue Gates Belt.
TT wheels Aluminum $400 picked up.
GT4202 (74mm) 1.10 ar less than 2k miles $850 , Zero shaft play , like new.
Dual Walbro 485 for E85 $300 for the set, I paid 240 each when they first came out.
I am going with different platform so everything has to go.
I have no use for this stuff i need them gone, i will take some pics when i get home tonight.
GSC S2
GSC Power-Division S2 cams for the Toyota Supra 2JZ-GTE. The S2 cams are designed for those running a large single turbo, larger than 71mm. These cams will not have bottom end losses over our S1 cams; nothing but gains will be seen and will promote great peak power gains. Gains of 60-100whp (depending on Turbo) have been seen by simply bolting the S2 cams in and reshimming. Designed for a rev range of 4000-8500rpms, these cams require upgraded valve spring, but can be run on stock cylinder heads. 800-1100whp camshaft set with a ruffer than stock idle.
S2 Specs gsc-6030S2
Intake 274 Duration 10.20mm peak lift, 109 degree Centerline
Exhaust 274 Duration 10.20mm Peak Lift, 119 degree Centerline
775 SHIPPED I will throw in a set of GSC Valve stem seals brand new in the box.
Titan Billet tensioner $250 with Kevlar Blue Gates Belt.
TT wheels Aluminum $400 picked up.
GT4202 (74mm) 1.10 ar less than 2k miles $850 , Zero shaft play , like new.
Dual Walbro 485 for E85 $300 for the set, I paid 240 each when they first came out.
I am going with different platform so everything has to go.
I have no use for this stuff i need them gone, i will take some pics when i get home tonight.
Last edited by 99SC42; 02-03-14 at 12:03 PM.
Thread
Thread Starter
Forum
Replies
Last Post
death666
SC400 / 300 Classifieds
1
10-10-12 11:33 AM
sj408
Performance & Maintenance
7
09-03-09 11:42 AM