AL FS: OMG, 2JZGTE heaven has landed in the fine state of Alabama
#1
1JZ Single SC400
Thread Starter
iTrader: (59)
Join Date: Jan 2009
Location: Alabama, Roll Tide!
Posts: 8,518
Likes: 0
Received 15 Likes
on
12 Posts
FS: OMG, 2JZGTE heaven has landed in the fine state of Alabama
I have aquired Jay's car, 1995 SC300. I have a trailer load full of parts and now it is for sale. Below is a parts list with more than fair pricing. No one claims dibs, money into my PayPal account first, wins the product. I haven't been able to pull all the parts, but alot has been done. RC Racing PB8X 2100 and are bored out. The fastest way to contact me is by text message or by phone. Look at my trader score, I do pretty fast shipping, legit product, and supply tracking numbers with every purchase. Do to my schedule, it might be up to 3-4 days before I can go to the post office or FedEx, so keep that in the back of your mind. Pictures will be up late tomorrow afternoon, so bare with me. I have many people, and I mean many, that will vouch for me in my customer service. If you need more details, then please text or phone me, or post up. I will answer to the best of my knowledge. The interior has BEEN PAINTED with SEM paint black landau, not original OEM color. Looks great to me. All prices W/O SHIPPING AND OBO!
SEND AS A GIFT PLEASE !!!!!!!!
PRICES HAVE BEEN CHANGED AND UPDATED, GREATLY REDUCED!!!!!
My paypal is marklinley36@gmail.com, my cell number is 205-482-5533.
Link for interior build and installation:
https://www.clublexus.com/forums/bui...y-1jzpwrd.html
Thank you, Mark
Custom one piece Dragon driveshaft, with rubber mounts $300
HKS F Con V Pro standalone management system, $575
Stock SC300 2JZGTE ECU, worked great when pulled from car.... $125
2JZGTE exhaust manifold, powder coated silver, $100
Greddy Digital turbo timer, $50
Greddy Digital boost controller, V Spec 2, $200
AC compressor, R134, $75
Alternator, $50
SC300 AC lines from firewall, $200
SC300 front lower control arms w/bolts, good ball joints and bushings, $125
SC300 front upper control arms w/bolts, $50
Driver side upper window trim, has small crack, but no through vinyl, w/speaker cover, $75
Passenger side window trim, crack, w/speaker cover, $60
Tweeter covers, w/new fabric, $10 both
Driver side door panel, complete w/armrest, and speaker cover, $100
Passenger side door panel, complete w/armrest, and speaker cover, $100
Driver/passenger side carpet kick panel, part that holds the carpet down, $30
Driver side seat, no rips/tears, or marks, recovered, no heated seats, $125
Passenger side, no rips/tears, or marks, recovered, no heated seats, $125
Driver side seat side trim piece w/button covers, $50
Passenger side seat side trim piece w/button covers, $50
Driver/passenger side plastic seat backing w/o nets, $50
Seats complete with all backing, head rest, side trim and seat buckles, $200 both
Rear upper back seat, $100
Rear bottom back seat, $75
Rear seat buckles, $25
Rear upper deck speaker cover, w/new covers, $50
Front seat buckles, $10 each
All seat belts, $100
Rear bottom side panels, $75 both
Rear upper trim plastic pieces, $75 both
Plastic handles, rear, $10 both
Headliner and middle plastic cover, no visors, $75
Sun visors w/wiring, $30 both
Metra plastic radio holder, $10
Metra wiring harness for SC300, $10
Both for $15
Console lid cover, $30
Center vent, $25
Passenger side vent, $10
Driver side vent, $10
Dashboard includes pieces for airbag, $75
HIGH GLOSS woodgrain, complete for all panels with airbag, $150
Steering wheel with airbag, $80
Steering plastic pieces, upper and lower, $15
Plastic around cluster, w/LED blue lighting, $25
Plastic under driver side w/entry light cover, $10
Plastic holder for trunk and gas release, $20
Switches for trunk and gas release, $20
Plastic for around the center console w/key hole cover, $20
Glove box, $25
Plastic piece under glove box, $15
Rear side glass, $60 each
Driver/passenger side glass, $100 both
SC300 fan motor, $20
Misc plastic air duct for vents, $20
Lexus SC300 emblems, all three, $20
Rear bumper, 1995, $125
Driver door, 1995, includes, window/regulator/handle $125
Passenger door, 1995, includes, window/regulator/handle $125
Hood, 1995, $125
Headlights, one has a crack but does not leak, $100 both
SEND AS A GIFT PLEASE !!!!!!!!
PRICES HAVE BEEN CHANGED AND UPDATED, GREATLY REDUCED!!!!!
My paypal is marklinley36@gmail.com, my cell number is 205-482-5533.
Link for interior build and installation:
https://www.clublexus.com/forums/bui...y-1jzpwrd.html
Thank you, Mark
Custom one piece Dragon driveshaft, with rubber mounts $300
HKS F Con V Pro standalone management system, $575
Stock SC300 2JZGTE ECU, worked great when pulled from car.... $125
2JZGTE exhaust manifold, powder coated silver, $100
Greddy Digital turbo timer, $50
Greddy Digital boost controller, V Spec 2, $200
AC compressor, R134, $75
Alternator, $50
SC300 AC lines from firewall, $200
SC300 front lower control arms w/bolts, good ball joints and bushings, $125
SC300 front upper control arms w/bolts, $50
Driver side upper window trim, has small crack, but no through vinyl, w/speaker cover, $75
Passenger side window trim, crack, w/speaker cover, $60
Tweeter covers, w/new fabric, $10 both
Driver side door panel, complete w/armrest, and speaker cover, $100
Passenger side door panel, complete w/armrest, and speaker cover, $100
Driver/passenger side carpet kick panel, part that holds the carpet down, $30
Driver side seat, no rips/tears, or marks, recovered, no heated seats, $125
Passenger side, no rips/tears, or marks, recovered, no heated seats, $125
Driver side seat side trim piece w/button covers, $50
Passenger side seat side trim piece w/button covers, $50
Driver/passenger side plastic seat backing w/o nets, $50
Seats complete with all backing, head rest, side trim and seat buckles, $200 both
Rear upper back seat, $100
Rear bottom back seat, $75
Rear seat buckles, $25
Rear upper deck speaker cover, w/new covers, $50
Front seat buckles, $10 each
All seat belts, $100
Rear bottom side panels, $75 both
Rear upper trim plastic pieces, $75 both
Plastic handles, rear, $10 both
Headliner and middle plastic cover, no visors, $75
Sun visors w/wiring, $30 both
Metra plastic radio holder, $10
Metra wiring harness for SC300, $10
Both for $15
Console lid cover, $30
Center vent, $25
Passenger side vent, $10
Driver side vent, $10
Dashboard includes pieces for airbag, $75
HIGH GLOSS woodgrain, complete for all panels with airbag, $150
Steering wheel with airbag, $80
Steering plastic pieces, upper and lower, $15
Plastic around cluster, w/LED blue lighting, $25
Plastic under driver side w/entry light cover, $10
Plastic holder for trunk and gas release, $20
Switches for trunk and gas release, $20
Plastic for around the center console w/key hole cover, $20
Glove box, $25
Plastic piece under glove box, $15
Rear side glass, $60 each
Driver/passenger side glass, $100 both
SC300 fan motor, $20
Misc plastic air duct for vents, $20
Lexus SC300 emblems, all three, $20
Rear bumper, 1995, $125
Driver door, 1995, includes, window/regulator/handle $125
Passenger door, 1995, includes, window/regulator/handle $125
Hood, 1995, $125
Headlights, one has a crack but does not leak, $100 both
Last edited by 1JZPWRD; 10-20-13 at 03:23 PM.
#2
1JZ Single SC400
Thread Starter
iTrader: (59)
Join Date: Jan 2009
Location: Alabama, Roll Tide!
Posts: 8,518
Likes: 0
Received 15 Likes
on
12 Posts
AEM foam intake with coupling and clamps, $40
Ignitor, $45
LS400 complete brakes for front only and SC400 complete brakes for rear, $200
Ignitor, $45
LS400 complete brakes for front only and SC400 complete brakes for rear, $200
Last edited by 1JZPWRD; 10-11-13 at 07:22 PM.
#5
1JZ Single SC400
Thread Starter
iTrader: (59)
Join Date: Jan 2009
Location: Alabama, Roll Tide!
Posts: 8,518
Likes: 0
Received 15 Likes
on
12 Posts
Guys I will answer these texts as fast I as I can. Sorry for the delay. I have had 13 text from 13 different people in past 15 minutes...
Python alarm has sold...
Python alarm has sold...
Trending Topics
#12
1JZ Single SC400
Thread Starter
iTrader: (59)
Join Date: Jan 2009
Location: Alabama, Roll Tide!
Posts: 8,518
Likes: 0
Received 15 Likes
on
12 Posts
I will try to update the list as I can. I have been super busy pulling parts and updating the pictures. The intercooling piping has some rubs from being so low, but nothing is cracked. The intake side of the piping might be sold, might not. If there are any questions on the fuel system here goes. I decided to let the fuel system go. For 1k plus shipping, it will include all the fuel lines and fittings, fuel pump, relays, wiring, and both inline filters. For 2K plus shipping, it will include all the above plus the fuel rail and the injectors. These injectors are quite large and has had nothing but E85 ran through them as well as the lines. Keep this in mind.
For those who is asking about the block, I will sell the block minus the sensors, mounts, brackets, oil pan pick up tube, flywheel, crank, pistons, rods, bearings, and rings. All of that will be pulled, just the block, for $200. IT IS BORED .40 OVER, SO KEEP THIS IN MIND. If you want the complete bottom end, minus the oil pan and pick up, it is $800. I will not ship. I am seriously thinking it is bearings that are bad, so for a extra bucks, you might get a very nice block. I am NOT dealing with it anymore. Let it be someone else's problem.
On the V160, it is for sale. $4500 firm. A lot of new parts includes, and have the receipts to prove it. It will include everything but the clutch, in other words complete, including the slave cylinder and line. This does not include the pedals, those are sold separately.
I cant stress enough how stressful this is by answering all these texts, and emails, and phone calls, and try to pull parts. I will do the best I can. Please don't ask the same questions, that is listed above. If you don't have the money, don't call me, please. Not being rude, but being honest. I have everything priced very fair in my obo, and all the interior is up for sale as of now.
Thank you!!!!
For those who is asking about the block, I will sell the block minus the sensors, mounts, brackets, oil pan pick up tube, flywheel, crank, pistons, rods, bearings, and rings. All of that will be pulled, just the block, for $200. IT IS BORED .40 OVER, SO KEEP THIS IN MIND. If you want the complete bottom end, minus the oil pan and pick up, it is $800. I will not ship. I am seriously thinking it is bearings that are bad, so for a extra bucks, you might get a very nice block. I am NOT dealing with it anymore. Let it be someone else's problem.
On the V160, it is for sale. $4500 firm. A lot of new parts includes, and have the receipts to prove it. It will include everything but the clutch, in other words complete, including the slave cylinder and line. This does not include the pedals, those are sold separately.
I cant stress enough how stressful this is by answering all these texts, and emails, and phone calls, and try to pull parts. I will do the best I can. Please don't ask the same questions, that is listed above. If you don't have the money, don't call me, please. Not being rude, but being honest. I have everything priced very fair in my obo, and all the interior is up for sale as of now.
Thank you!!!!
Last edited by 1JZPWRD; 10-04-13 at 06:28 PM.
#13
1JZ Single SC400
Thread Starter
iTrader: (59)
Join Date: Jan 2009
Location: Alabama, Roll Tide!
Posts: 8,518
Likes: 0
Received 15 Likes
on
12 Posts
I also have a complete LS400 set for the front. Includes calipers, brake pads, rotors, etc. Will take $250 shipped. I have to pull these, so it will be next week before I can ship them.
#15
1JZ Single SC400
Thread Starter
iTrader: (59)
Join Date: Jan 2009
Location: Alabama, Roll Tide!
Posts: 8,518
Likes: 0
Received 15 Likes
on
12 Posts
Sorry so crappy, but there is hardly any light in the garage right now. No scratches or dents. If they are any, it as us moving stuff and working on the car. Very, very good shape. LMK, Jason.