CA Sc300/400 Fiberglass amp rack and ED nine.5 + bit one
10-03-13, 02:03 PM
#1
Lead Lap
Thread Starter
iTrader: (2)
Join Date: Jul 2005
Location: NORCAL
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
Sc300/400 Fiberglass amp rack and ED nine.5 + bit one
Thought i would post it here also as it is specifically for a sc hope its ok
Amp rack and amp $600
Bit one with Brand new DRC $550
Selling a custom Fiberglass amp rack with a Elemental designs nine.5, (this will require some you to reinforce the trunk lid with some flat steel and bolts accordingly for mounting) currently wrapped in black suede with purple insert.
The amp itself was bought brand new 5-6 years ago and has only been used for maybe a couple months it has a piece of scratch resistant plexi with the ED plaque monted in the center for a nice look was going to illuminate the plexi just never finished the project up. I dont have the bass **** i lost it in a recent move it may be somewhere but i havent found it yet
You will need upgraded trunk shocks to support the weight of the amp rack, i used sc300/400 trunk shocks for trunk lids with a oem spoiler as they are stronger and work fine supporting the amp in terms of opening and staying up.
Also selling a audison bit one processor, Comes with Brand new remote control as they can go bad over time have receipt from abt.com if u want to see, the bitone itself is bare with just the power connectors(4pin molex looking) i dont have the speaker input connectors but they are semi commong and can be replaced. I also dont have the setup/test tone cd but they are avaiable for download thru their website. All it is missing is the CD and if you are integrating into a factory system u need the 4pin input connectors. the port where the remote plugs in(telephone connector) doesnt clip in very tight but holds shouldnt be a problem
Tried to give the best description i can, this is not plug and play and is for the audio enthusiast or someone that is going to have a shop fabricate and install/supprot this monster. if there are questions please ask im looking for local pickup for the amp and rack as it is heavy the bit one i can ship at buyers expense, would like to sell together but will part.
Amp rack and amp $600
Bit one with Brand new DRC $550
Selling a custom Fiberglass amp rack with a Elemental designs nine.5, (this will require some you to reinforce the trunk lid with some flat steel and bolts accordingly for mounting) currently wrapped in black suede with purple insert.
The amp itself was bought brand new 5-6 years ago and has only been used for maybe a couple months it has a piece of scratch resistant plexi with the ED plaque monted in the center for a nice look was going to illuminate the plexi just never finished the project up. I dont have the bass **** i lost it in a recent move it may be somewhere but i havent found it yet
You will need upgraded trunk shocks to support the weight of the amp rack, i used sc300/400 trunk shocks for trunk lids with a oem spoiler as they are stronger and work fine supporting the amp in terms of opening and staying up.
Also selling a audison bit one processor, Comes with Brand new remote control as they can go bad over time have receipt from abt.com if u want to see, the bitone itself is bare with just the power connectors(4pin molex looking) i dont have the speaker input connectors but they are semi commong and can be replaced. I also dont have the setup/test tone cd but they are avaiable for download thru their website. All it is missing is the CD and if you are integrating into a factory system u need the 4pin input connectors. the port where the remote plugs in(telephone connector) doesnt clip in very tight but holds shouldnt be a problem
Tried to give the best description i can, this is not plug and play and is for the audio enthusiast or someone that is going to have a shop fabricate and install/supprot this monster. if there are questions please ask im looking for local pickup for the amp and rack as it is heavy the bit one i can ship at buyers expense, would like to sell together but will part.
10-04-13, 10:16 AM
#7
Lead Lap
Thread Starter
iTrader: (2)
Join Date: Jul 2005
Location: NORCAL
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
the **** is replaceable even tho the company is out of buisness they are not to hard to find @uzz-tt.
@tientony if you are really interested i will get you a price sometime this weekend. it is pretty big and heavy(think of how big the trunk lid is) also weighs about the same lol
@tientony if you are really interested i will get you a price sometime this weekend. it is pretty big and heavy(think of how big the trunk lid is) also weighs about the same lol
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
pwrdbyrice
Lexus Audio, Video, Security & Electronics
1
08-12-08 06:58 AM
