CAN-Other FS: 2 Supra Calipers Rotors and Pads
03-20-13, 05:47 AM
#1
Pole Position
Thread Starter
FS: 2 Supra Calipers Rotors and Pads
**SOLD**
I purchased 2 rebuilt Supra TT Calipers (Front) - Extremestop Rotors and Ceramic Pads - they Bolt right up onto my soarer (sc300/sc400) without any problem aside the backing plate could be removed or bent ever so slightly..(no shaving off anything like you would with the LS400 calipers)
Apparently these are bolt ons for SC300/400/430 GS300/430 LS400 IS300 and im sure a few different vehicles as well.
Calipers are 4 pot - have NOT been used since being rebuilt - came right from Altrom - so new seals and what not - paint isnt NEW but you wont notice the small imperfections if you bolted them up and looked at them through your wheels, they look to be in good condition.
The problem lies with your rims - they have to clear the brakes - any 17" rim will do as long as the spokes go Outwards to the lip of the rim - not inwards - (any wheel that fits a supra will fit over these brakes on the SC300/400/soarer) So since i wont get rid of my 3pc rims i wont be using these brakes
Ill send pics of the actual items later tonight - but heres what the calipers and rotors are/look like.
As i didnt have Core's to send in - i Paid just over 600$ CDN for whole package -
I dont mind separating the calipers as you can get pads and rotors yourself or if you want the whole thing, great.
$600 obo - plus shipping to your State/Province - I May be heading to the US shortly so i can always ship them out via USPS (no cross border cost(s) and stuff)
I purchased 2 rebuilt Supra TT Calipers (Front) - Extremestop Rotors and Ceramic Pads - they Bolt right up onto my soarer (sc300/sc400) without any problem aside the backing plate could be removed or bent ever so slightly..(no shaving off anything like you would with the LS400 calipers)
Apparently these are bolt ons for SC300/400/430 GS300/430 LS400 IS300 and im sure a few different vehicles as well.
Calipers are 4 pot - have NOT been used since being rebuilt - came right from Altrom - so new seals and what not - paint isnt NEW but you wont notice the small imperfections if you bolted them up and looked at them through your wheels, they look to be in good condition.
The problem lies with your rims - they have to clear the brakes - any 17" rim will do as long as the spokes go Outwards to the lip of the rim - not inwards - (any wheel that fits a supra will fit over these brakes on the SC300/400/soarer) So since i wont get rid of my 3pc rims i wont be using these brakes
Ill send pics of the actual items later tonight - but heres what the calipers and rotors are/look like.
As i didnt have Core's to send in - i Paid just over 600$ CDN for whole package -
I dont mind separating the calipers as you can get pads and rotors yourself or if you want the whole thing, great.
$600 obo - plus shipping to your State/Province - I May be heading to the US shortly so i can always ship them out via USPS (no cross border cost(s) and stuff)
Last edited by soarer93; 03-26-13 at 07:17 AM.
03-21-13, 10:54 AM
#3
Pole Position
Thread Starter
Thread
Thread Starter
Forum
Replies
Last Post
Blk97SC300
SC400 / 300 Classifieds
2
11-14-06 02:33 PM