IN NA-T setup--AEM ecu,DLI,FSMOTO intake ect...
12-03-12, 05:06 PM
#1
Driver
Thread Starter
iTrader: (1)
Join Date: Mar 2007
Location: Indiana
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
NA-T setup--AEM ecu,DLI,FSMOTO intake ect...
First name:Adam
Last name:Williams
City: indianapolis
State: Indiana
Zip code: 46227
Phone# 317-702-6089
Email: g2turboteg@yahoo.com
As you all know I'm parting out my car(1997 sc300 turbo)car made 650whp with this setup.I am now listing Some of the items I have for sale.All performance parts have less than 1000 miles on them. I am selling due to car not selling together so that is the only reason parts are being sold separate. No issues with parts all in great condition. serious buyers only ,don't lowball me I won't respond!! Thanks
All items
(1) AEM ecu for non turbo 2jzge engines- 30-1101--comes with box,cable(serial to USB)connector and cable and AEM 3.5 bar map sensor and AEM air temp sensor-
$DEPOSIT RECEIVED
(2) HKS DLI for distributor 2jzge (VERY RARE)and comes with adapter harness plug-n-play-$SOLD
(3) first state motorsports intake complete(polished)-And I mean complete-complete bolt on--
-intake with lower runners already attached and Wilson 80mm throttle body,
-vacuum dist. Block,throttle cable,TT supra IACV
-first state motorsports 2jzge non turbo fuel rail(polished)
-id1000's with pigtails to plug-n-play(no cutting of factory connectors) only ran e85 through them
$DEPOSIT RECIEVED
(4) custom turbo kit I put together-build for sc300-includes the following-complete BOLT-ON
-precision 67mm gtq .81 a/r-does not smoke no shaft play-polished housing
-xs power turbo manifold and downpipe and wastegate dump
-precision 44mm waste gate- 1bar spring-comes with other springs as well
-boost logic turbo blanket
-3 inch custom piping with all black hose couplers(extreme psi) and all with vband clamps
-HKS racing blowoff valve(the best one made)rare
-xs power intercooler(4inch thick core) 3inch inlet and outlet
-4 inch intake and k&n air filter
-oil feed and oil return lines
DEPOSIT RECEIVED
(5) alky control methenal injection twin nozzle setup for sc300 using the FSMOTO intake.
Comes with controller,pump,nozzles lines and hardware and modified washer tank-
$250shipped
Last name:Williams
City: indianapolis
State: Indiana
Zip code: 46227
Phone# 317-702-6089
Email: g2turboteg@yahoo.com
As you all know I'm parting out my car(1997 sc300 turbo)car made 650whp with this setup.I am now listing Some of the items I have for sale.All performance parts have less than 1000 miles on them. I am selling due to car not selling together so that is the only reason parts are being sold separate. No issues with parts all in great condition. serious buyers only ,don't lowball me I won't respond!! Thanks
All items
(1) AEM ecu for non turbo 2jzge engines- 30-1101--comes with box,cable(serial to USB)connector and cable and AEM 3.5 bar map sensor and AEM air temp sensor-
$DEPOSIT RECEIVED
(2) HKS DLI for distributor 2jzge (VERY RARE)and comes with adapter harness plug-n-play-$SOLD
(3) first state motorsports intake complete(polished)-And I mean complete-complete bolt on--
-intake with lower runners already attached and Wilson 80mm throttle body,
-vacuum dist. Block,throttle cable,TT supra IACV
-first state motorsports 2jzge non turbo fuel rail(polished)
-id1000's with pigtails to plug-n-play(no cutting of factory connectors) only ran e85 through them
$DEPOSIT RECIEVED
(4) custom turbo kit I put together-build for sc300-includes the following-complete BOLT-ON
-precision 67mm gtq .81 a/r-does not smoke no shaft play-polished housing
-xs power turbo manifold and downpipe and wastegate dump
-precision 44mm waste gate- 1bar spring-comes with other springs as well
-boost logic turbo blanket
-3 inch custom piping with all black hose couplers(extreme psi) and all with vband clamps
-HKS racing blowoff valve(the best one made)rare
-xs power intercooler(4inch thick core) 3inch inlet and outlet
-4 inch intake and k&n air filter
-oil feed and oil return lines
DEPOSIT RECEIVED
(5) alky control methenal injection twin nozzle setup for sc300 using the FSMOTO intake.
Comes with controller,pump,nozzles lines and hardware and modified washer tank-
$250shipped
Last edited by 97sc300t; 12-12-12 at 05:03 AM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
mteele
SC400 / 300 Classifieds
24
12-22-09 04:48 AM
That-Guy
SC400 / 300 Classifieds
0
01-29-09 07:18 PM
