PA 1UZFE FULL exhaust with cutouts. Complete 1 off
#1
1UZFE FULL exhaust with cutouts. Complete 1 off
Just as the title says, Up for grabs is my 1 off COMPLETE exhaust with Remote electric cut outs. This is a true dual set up that use's all of the factory exhaust hangers and its tucked as High as possible for maximum clearance
Features:
~IMF Headers for the 1uzfe plus gaskets
~Full 3 inch construction
~Full High Grade Stainless Steel
~ Magnaflow Mufflers with Quad Tips
~Twin Electric cut outs with turn downs
I'm a little over 3,000 with this exhaust. But I wanted a complete custom 1 off performance exhaust. I had the cut outs wired to my factory Memory seat buttons because I no longer have factory seats But you can add a switch anywhere for them. 1 button opens them, the other close's them. The exhaust has only been on for about a month and was only really ran 4-5 times about 30 min each, so you will still have the new exhaust pipe smell
Heres some Media for it. Some pics some vids as well
Headers
Videos
With cut outs Closed, Then Opening the cut outs at 1:08 into the movie
And heres a youtube video as well
I am asking 2000$ OR BEST OFFER Buyer pays ALL shipping costs If you think this is too much then dont even waste my time and move along with your cheap Ebay crap.
All the hard work and money has been spent for you. I'm taking close to an 1180$ loss in this even if I get my asking price. This is a once in a life time deal for you 1uzfe guys! Dont let it slip threw your fingers. My Supercharger set up sold in 3 days, Im sure this will go pretty fast as well!
And just for show on how great of a deal this is...
Headers - 750$ plus shipping
Cut outs - 450$
Mufflers - 190$
Piping - 710$
Flanges - 120$
Tips - 120$
Gaskets - 40$
Labor - 800$
--------------------
Total- 3180$
Im asking 2000$.... its been ran a few times.
You will NEVER find a more complete system for your SC. unless you make your own.
No low Ballers, If you send me stupid low amounts Im just going to ignore your Pm's
Features:
~IMF Headers for the 1uzfe plus gaskets
~Full 3 inch construction
~Full High Grade Stainless Steel
~ Magnaflow Mufflers with Quad Tips
~Twin Electric cut outs with turn downs
I'm a little over 3,000 with this exhaust. But I wanted a complete custom 1 off performance exhaust. I had the cut outs wired to my factory Memory seat buttons because I no longer have factory seats But you can add a switch anywhere for them. 1 button opens them, the other close's them. The exhaust has only been on for about a month and was only really ran 4-5 times about 30 min each, so you will still have the new exhaust pipe smell
Heres some Media for it. Some pics some vids as well
Headers
Videos
With cut outs Closed, Then Opening the cut outs at 1:08 into the movie
And heres a youtube video as well
I am asking 2000$ OR BEST OFFER Buyer pays ALL shipping costs If you think this is too much then dont even waste my time and move along with your cheap Ebay crap.
All the hard work and money has been spent for you. I'm taking close to an 1180$ loss in this even if I get my asking price. This is a once in a life time deal for you 1uzfe guys! Dont let it slip threw your fingers. My Supercharger set up sold in 3 days, Im sure this will go pretty fast as well!
And just for show on how great of a deal this is...
Headers - 750$ plus shipping
Cut outs - 450$
Mufflers - 190$
Piping - 710$
Flanges - 120$
Tips - 120$
Gaskets - 40$
Labor - 800$
--------------------
Total- 3180$
Im asking 2000$.... its been ran a few times.
You will NEVER find a more complete system for your SC. unless you make your own.
No low Ballers, If you send me stupid low amounts Im just going to ignore your Pm's
Last edited by JDMmuscle; 06-21-12 at 09:32 AM.
#5
Instructor
iTrader: (5)
Any idea what grade steel?
In case people didn't notice, this is a real mandrel bent exhaust. Not the typical crush bent exhaust that 99% of the local shops everywhere do and tell you otherwise. There are not many mandrel benders out there and the vast majority of shops do not have one. NO SHOP anywhere in NYC has a mandrel bender in house. Same goes for the ENTIRE state of NJ (go ahead and try to prove me wrong ) The profit margin isn't there for most shops to reproduce this using pre-bent mandrel pieces. Grab it while you can.
In case people didn't notice, this is a real mandrel bent exhaust. Not the typical crush bent exhaust that 99% of the local shops everywhere do and tell you otherwise. There are not many mandrel benders out there and the vast majority of shops do not have one. NO SHOP anywhere in NYC has a mandrel bender in house. Same goes for the ENTIRE state of NJ (go ahead and try to prove me wrong ) The profit margin isn't there for most shops to reproduce this using pre-bent mandrel pieces. Grab it while you can.
#6
Any idea what grade steel?
In case people didn't notice, this is a real mandrel bent exhaust. Not the typical crush bent exhaust that 99% of the local shops everywhere do and tell you otherwise. There are not many mandrel benders out there and the vast majority of shops do not have one. NO SHOP anywhere in NYC has a mandrel bender in house. Same goes for the ENTIRE state of NJ (go ahead and try to prove me wrong ) The profit margin isn't there for most shops to reproduce this using pre-bent mandrel pieces. Grab it while you can.
In case people didn't notice, this is a real mandrel bent exhaust. Not the typical crush bent exhaust that 99% of the local shops everywhere do and tell you otherwise. There are not many mandrel benders out there and the vast majority of shops do not have one. NO SHOP anywhere in NYC has a mandrel bender in house. Same goes for the ENTIRE state of NJ (go ahead and try to prove me wrong ) The profit margin isn't there for most shops to reproduce this using pre-bent mandrel pieces. Grab it while you can.
Hey man, thank you so much for the kind words. To answer your question its 304 Stainless, but in a 12 gauge application. VERY thick, makes for a LOT of sound transfer and reverberation. Very expensive as well. This is another reason why my asking price is what it is. This is Top of the line steel. This will make some one very very happy.
You will NEVER have to buy another exhaust set up ever again. You want Rumble and growl. Fantastic, you want Roar and Obnoxious v8 greatness to scare away all those civics? Open those dumps from the comfort of your cabin and let that 1uzfe exhale!
Last edited by JDMmuscle; 06-20-12 at 06:04 PM.