CA Part:1 of the part out
#1
Lead Lap
Thread Starter
iTrader: (8)
Join Date: Jan 2005
Location: ca
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
Part:1 of the part out
UPDATED
Complete 1.5jz. Ran for 44 miles mostly break in. the car made 445hp and 341 torque on piggy back. Could have went more but i didnt want over 450hp. Will need to check the head but everything is in working order. 1.5jz will include OR WILL PART OUT FOR THE FOLLOWING PRICES:
polished valve covers $200
polished intake mainfold $300
usdm 2jz cams ((((((SOLD)))))
BC springs/ retainers for 2jz ((((((SOLD)))))
2jz bottom end $700 ((((((SOLD)))))
370cc injectors $65.00
the bottom end is built with ((((((SOLD)))))
2jz bore, honed, hot tanked, etc........ $150 BARE BLOCK ((((((SOLD)))))
Scat rods (good to 1000hp) $400 ((((((SOLD)))))
cp pistons ( not sure the measurements but theyare 8:5:1) $500 ((((((SOLD)))))
ARP head, main, rod kits ((((SOLD)))))
JZ gasket kit ((((((SOLD)))))
npr ring set ((((((SOLD)))))
2Jzge Oem piston/rods $ 250
1j polished throttle body $ 150
New water pump $ 100 OBO I DONT KNOW HOW MUCH THIS GOES FOR.
the PRICE: $1200 obo or $1500 shipped anywhere in the USA. should you want wiring and ecu it will be an extra $500 should you want the blitz r fit for tuning it comes with the apexi rsm to eliminate speed cut for $350
This build was way more than that, but because im a nice guy this is what is fair.
Complete 1.5jz. Ran for 44 miles mostly break in. the car made 445hp and 341 torque on piggy back. Could have went more but i didnt want over 450hp. Will need to check the head but everything is in working order. 1.5jz will include OR WILL PART OUT FOR THE FOLLOWING PRICES:
polished valve covers $200
polished intake mainfold $300
usdm 2jz cams ((((((SOLD)))))
BC springs/ retainers for 2jz ((((((SOLD)))))
2jz bottom end $700 ((((((SOLD)))))
370cc injectors $65.00
the bottom end is built with ((((((SOLD)))))
2jz bore, honed, hot tanked, etc........ $150 BARE BLOCK ((((((SOLD)))))
Scat rods (good to 1000hp) $400 ((((((SOLD)))))
cp pistons ( not sure the measurements but theyare 8:5:1) $500 ((((((SOLD)))))
ARP head, main, rod kits ((((SOLD)))))
JZ gasket kit ((((((SOLD)))))
npr ring set ((((((SOLD)))))
2Jzge Oem piston/rods $ 250
1j polished throttle body $ 150
New water pump $ 100 OBO I DONT KNOW HOW MUCH THIS GOES FOR.
the PRICE: $1200 obo or $1500 shipped anywhere in the USA. should you want wiring and ecu it will be an extra $500 should you want the blitz r fit for tuning it comes with the apexi rsm to eliminate speed cut for $350
This build was way more than that, but because im a nice guy this is what is fair.
Last edited by soardrft; 08-14-11 at 03:33 PM. Reason: UPDATE PRICES/ PARTS
#3
Lead Lap
Thread Starter
iTrader: (8)
Join Date: Jan 2005
Location: ca
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
Update full body kit
i will update more as i come across pictures of my build. This body kit is from extreme dimension. In the picture it has a rear lip for the back bumper. i will let this go for $400 obo not shipped. Should you want an OEM black back bumper along with it ill take $500 not shipped. ((((((SOLD)))))
remember the kit is brand new and still in plastic. the oem bumper has the side guards and is in good shape.
Now for the sound system. This will include the template for the front doors so YES IT IS A DIRECT BOLT UP. The deck has been used for 2 years and has a small scratch. it works perfectly and intergrates with most phones although it says Ipod only. i connect my andriod phone and it plays music and is controlled through the radio. price for radio is $300 obo ((((((SOLD)))))
Now for the speakers. mb quart 6.5 in the front with template to bolt up. as you can see you can use the stock connectors so no cutting required. the rear is 5.25 slides right into position and you just need to bolt down for best sound. i still have the boxes and the grills. The speakers have only been installed NEVER used. price will be $200 obo
remember the kit is brand new and still in plastic. the oem bumper has the side guards and is in good shape.
Now for the sound system. This will include the template for the front doors so YES IT IS A DIRECT BOLT UP. The deck has been used for 2 years and has a small scratch. it works perfectly and intergrates with most phones although it says Ipod only. i connect my andriod phone and it plays music and is controlled through the radio. price for radio is $300 obo ((((((SOLD)))))
Now for the speakers. mb quart 6.5 in the front with template to bolt up. as you can see you can use the stock connectors so no cutting required. the rear is 5.25 slides right into position and you just need to bolt down for best sound. i still have the boxes and the grills. The speakers have only been installed NEVER used. price will be $200 obo
Last edited by soardrft; 08-14-11 at 03:34 PM. Reason: updated prices
#5
Lead Lap
Thread Starter
iTrader: (8)
Join Date: Jan 2005
Location: ca
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
Now parting out motor. 2jz usdm cams fit to 1j $ 200 shipped Bc spring/retainers valves $ 250 2Jzge Oem piston/rods $ 250 2Jzgte Scat rods $ 400 2Jzgte 8: 5: 1 pistons $ 400 1j Polished intake manifold $ 300 1j polished valve covers $ 250 1j polished throttle body $ 150 Now parting out motor. 2jz usdm cams fit to 1j $ 200 shipped Bc spring/retainers valves $ 250 2Jzge Oem piston/rods $ 250 2Jzgte Scat rods $ 400 2Jzgte 8: 5: 1 pistons $ 400 1j Polished intake manifold $ 300 1j polished valve covers $ 250 1j polished throttle body $ 150 New water pump $ 150New water pump $ 150
#6
Driver School Candidate
Join Date: Jul 2011
Location: FL
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
do you have a head for sale?
Now parting out motor. 2jz usdm cams fit to 1j $ 200 shipped Bc spring/retainers valves $ 250 2Jzge Oem piston/rods $ 250 2Jzgte Scat rods $ 400 2Jzgte 8: 5: 1 pistons $ 400 1j Polished intake manifold $ 300 1j polished valve covers $ 250 1j polished throttle body $ 150 Now parting out motor. 2jz usdm cams fit to 1j $ 200 shipped Bc spring/retainers valves $ 250 2Jzge Oem piston/rods $ 250 2Jzgte Scat rods $ 400 2Jzgte 8: 5: 1 pistons $ 400 1j Polished intake manifold $ 300 1j polished valve covers $ 250 1j polished throttle body $ 150 New water pump $ 150New water pump $ 150
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Highway
Wheels and Tires Classifieds
4
07-01-14 06:19 PM
Studiogeek
Wheels and Tires Classifieds
2
03-10-13 04:38 PM
Shaminii
Wheels and Tires Classifieds
2
09-11-09 01:36 AM