CA LS400 Brake Setup (Caliper, Rotor, SS Brake Line), NA-T Cut to Fit Piping, HID Kits
#1
LS400 Brake Setup (Caliper, Rotor, SS Brake Line), NA-T Cut to Fit Piping, HID Kits
Before you PM me for a shipping quote, here's the direct link to UPS and USPS' websites
https://wwwapps.ups.com/ctc/request?...WT.svl=PNRO_L1
http://www.usps.com/tools/calculatep...lculatepostage
My location is Riverside, CA 92507. I listed the approximate weight for each item if you want it shipped. Confirm the shipping prices with me before you send payment.
Offers are welcomed if they're reasonable.
my paypal is k3n.chu@gmail.com
LS400 Complete Brake Setup
The calipers were bought from another member, which was a salvaged car pull. Lines were used for about 40k miles when I bought them from Lexfolife, but I never got to install them.
You get:
2x 96-00 LS400 Calipers (with stock pads)
2x BRAND NEW Raybestos Advanced Technology Blank Rotors (better than Professional Grade series)
2x Rotora Stainless Steel Teflon Brake Lines
70 lbs.
$350
2.5" NA-T Intercooler Piping (Cut-to-fit)
This will fit your na-t setup as long as you don't have a gte-style manifold. The piping is made out of aluminum, not stainless steel. The MAF bung is welded on the cold side and is blow-through. Comes with misc. 4" pipes for the turbine intake and pre-bend pipes (in stainless steel). All piping ends are beaded.
Comes with quality t-bolts and 3-ply couplers. This is a textbook 3 coupler per side build: 1 2.5" on the turbine, 2 on the intercooler (2.5" to 3"), and 1 on the throttle body (2.5" to 2.75"), and 2 2.5" couplers in between.
$400
BRAND NEW DDM Tuning 9006 3000K 4500K HID Kits
Comes with lifetime warranty on ballast and bulb. I have a few sets left.
$40 + $11 USPS Priority Flat-Rate Box
Local pick-up is more than welcomed.
Thanks for looking!
https://wwwapps.ups.com/ctc/request?...WT.svl=PNRO_L1
http://www.usps.com/tools/calculatep...lculatepostage
My location is Riverside, CA 92507. I listed the approximate weight for each item if you want it shipped. Confirm the shipping prices with me before you send payment.
Offers are welcomed if they're reasonable.
my paypal is k3n.chu@gmail.com
LS400 Complete Brake Setup
The calipers were bought from another member, which was a salvaged car pull. Lines were used for about 40k miles when I bought them from Lexfolife, but I never got to install them.
You get:
2x 96-00 LS400 Calipers (with stock pads)
2x BRAND NEW Raybestos Advanced Technology Blank Rotors (better than Professional Grade series)
2x Rotora Stainless Steel Teflon Brake Lines
- Includes union bolt and washers
70 lbs.
$350
2.5" NA-T Intercooler Piping (Cut-to-fit)
This will fit your na-t setup as long as you don't have a gte-style manifold. The piping is made out of aluminum, not stainless steel. The MAF bung is welded on the cold side and is blow-through. Comes with misc. 4" pipes for the turbine intake and pre-bend pipes (in stainless steel). All piping ends are beaded.
Comes with quality t-bolts and 3-ply couplers. This is a textbook 3 coupler per side build: 1 2.5" on the turbine, 2 on the intercooler (2.5" to 3"), and 1 on the throttle body (2.5" to 2.75"), and 2 2.5" couplers in between.
$400
BRAND NEW DDM Tuning 9006 3000K 4500K HID Kits
Comes with lifetime warranty on ballast and bulb. I have a few sets left.
$40 + $11 USPS Priority Flat-Rate Box
Local pick-up is more than welcomed.
Thanks for looking!
Last edited by ElitistK; 08-30-10 at 10:24 AM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
GS_Louis
2Gen GS430 / 400/ 300 Classifieds (98-05)
6
10-12-12 06:47 PM