KS Electric fans, 1UZ Plug and play stand alone, Tons more! all OBO
#1
Super Moderator
Thread Starter
iTrader: (33)
Join Date: Jul 2004
Location: Sideways on the Yellow Brick Road! < Thats KS!
Posts: 5,827
Likes: 0
Received 4 Likes
on
4 Posts
Electric fans, 1UZ Plug and play stand alone, Tons more! all OBO
All prices do not include shipping unless noted
Battle Version rods, Electric fans, stand alone, Drif DVD's, Bomex mirrors, Supermade lenses, Walbro pump, Bride hood pins, Car PC, Touch screen, 460cc injectors and More.
SOLD Selling my Brand new SuperMade lenses, still in original box. I know its new price but they are new and you dont have to wait months to get them from Japan, and I dont really need to sell them. I could install them on a set of lights and get twice that, I know, I just sold a set. SOLD
430 brake light: $45
1uz Hydralic fan delete bracket and pulley, installed never ran $100
New Trico Neoform wiper blades for SC $13.00
Pair of Junk Supra head lights, great for parts or custom work $40
Rear SC glass: $95
New Agency Power black shorty antenna for Honda S2000: $30.00
(SOLD) 8 PLUG & PLAY 460CC fuel injectors in good condition DENSO part#195500-2010 Plug and play $150 (SOLD)
(SOLD)Battle version traction/trailing rods. Brand new, only install never driven. They sell new for $500+ selling for $375 (SOLD)
(SOLD) Bride monster locking hood pins Super Rare! Only 1000 sets were made! $90 (SOLD)
Lexus seat belt pads $10
(SOLD) Bomex mirrors Jade green $150 (SOLD)
(SOLD) 8 New 1UZ-FE colder Iridium spark plugs $75 (SOLD)
1uz underdrive pulley and belt, Custom made! $130
Battle Version rods, Electric fans, stand alone, Drif DVD's, Bomex mirrors, Supermade lenses, Walbro pump, Bride hood pins, Car PC, Touch screen, 460cc injectors and More.
SOLD Selling my Brand new SuperMade lenses, still in original box. I know its new price but they are new and you dont have to wait months to get them from Japan, and I dont really need to sell them. I could install them on a set of lights and get twice that, I know, I just sold a set. SOLD
430 brake light: $45
1uz Hydralic fan delete bracket and pulley, installed never ran $100
New Trico Neoform wiper blades for SC $13.00
Pair of Junk Supra head lights, great for parts or custom work $40
Rear SC glass: $95
New Agency Power black shorty antenna for Honda S2000: $30.00
(SOLD) 8 PLUG & PLAY 460CC fuel injectors in good condition DENSO part#195500-2010 Plug and play $150 (SOLD)
(SOLD)Battle version traction/trailing rods. Brand new, only install never driven. They sell new for $500+ selling for $375 (SOLD)
(SOLD) Bride monster locking hood pins Super Rare! Only 1000 sets were made! $90 (SOLD)
Lexus seat belt pads $10
(SOLD) Bomex mirrors Jade green $150 (SOLD)
(SOLD) 8 New 1UZ-FE colder Iridium spark plugs $75 (SOLD)
1uz underdrive pulley and belt, Custom made! $130
Last edited by ScottURnot; 02-08-10 at 08:01 PM.
#2
Super Moderator
Thread Starter
iTrader: (33)
Join Date: Jul 2004
Location: Sideways on the Yellow Brick Road! < Thats KS!
Posts: 5,827
Likes: 0
Received 4 Likes
on
4 Posts
(SOLD) Low miles Walbro 255 pump $60 (SOLD)
Flex-A-Lite daul fans $180
(SOLD) Nice Black passanger door switch $30 (SOLD)
DVD's $5 each or all seven for $25
4.0 GT emblems $20
Adaptronics Stand alone 100% Plug and play!
its a brand new turn key Adaptronics stand alone ECU. I originally purchased this stand alone ECU and then I bought a supra jumper lead. I posted the jumper harness to Neil Griffiths in Australia. Next I paid him to wire it up as a turn key plug and play unit. Neil is running this exact stand alone on two different 1UZ cars running 15lbs boost with great success. He wired it up and ran it on his car for me to verify it was plug and play. Even had it dyno tuned at 10lbs boost and 15lbs. It comes with both Maps! It is going to practically run right out of the box.
If you plan on boosting a SC400 this is a great chance to get into a plug and play stand alone at a great price. Not to mention you wont have to wait months to get a unit made up and shipped.
This is the closest thing to a run out of the box setup you will ever find. You will need to upgrade to larger injectors (it was tuned on 390cc) and add boost. It will include both a 10lb and a 15lb map.
When I bought this the cost for the ECU/wiring labor and test/tune was About $1400, then I bought the TT jumper harness for another $390, paid about $40 shipping to Australia so in total i spent almost $1900 dollars having this thing set up. It is literally brand new.
I will let it go for $980 add another $150 and get the full Video gauge system that allows you to put a wide selection of gauges on a screen like the one for sale below. this is bad ***, no more trying to figure out where the gauges mount
Flex-A-Lite daul fans $180
(SOLD) Nice Black passanger door switch $30 (SOLD)
DVD's $5 each or all seven for $25
4.0 GT emblems $20
Adaptronics Stand alone 100% Plug and play!
its a brand new turn key Adaptronics stand alone ECU. I originally purchased this stand alone ECU and then I bought a supra jumper lead. I posted the jumper harness to Neil Griffiths in Australia. Next I paid him to wire it up as a turn key plug and play unit. Neil is running this exact stand alone on two different 1UZ cars running 15lbs boost with great success. He wired it up and ran it on his car for me to verify it was plug and play. Even had it dyno tuned at 10lbs boost and 15lbs. It comes with both Maps! It is going to practically run right out of the box.
If you plan on boosting a SC400 this is a great chance to get into a plug and play stand alone at a great price. Not to mention you wont have to wait months to get a unit made up and shipped.
This is the closest thing to a run out of the box setup you will ever find. You will need to upgrade to larger injectors (it was tuned on 390cc) and add boost. It will include both a 10lb and a 15lb map.
When I bought this the cost for the ECU/wiring labor and test/tune was About $1400, then I bought the TT jumper harness for another $390, paid about $40 shipping to Australia so in total i spent almost $1900 dollars having this thing set up. It is literally brand new.
I will let it go for $980 add another $150 and get the full Video gauge system that allows you to put a wide selection of gauges on a screen like the one for sale below. this is bad ***, no more trying to figure out where the gauges mount
Last edited by ScottURnot; 01-11-10 at 08:40 PM.
#3
Super Moderator
Thread Starter
iTrader: (33)
Join Date: Jul 2004
Location: Sideways on the Yellow Brick Road! < Thats KS!
Posts: 5,827
Likes: 0
Received 4 Likes
on
4 Posts
CAR PC SYSTEM ALL SOLD!
(SOLD) Complete car PC. This screen is a perfect centerpiece for any car! Absolutely beautiful. It is custom made by Mop Top Pros and the craftsmanship is awesome. It has a 10.4" touch screen monitor molded in. This custom work cost Zach over $600 for just the part to be made. Add the Remote controlled monitor and climate control and that alone is more than I am asking for the whole system. The Climate control has been sent to Lextech Lighting and had LED upgrades $$$$$$$ are you seeing the Value?
Now add the PC, the keyboard with ball mouse, the Mobil mouse the GPS and cables and you have a extreme system.
I was considering installing this in my car but have decided I have too much on my plate already. My plan was for it to be my stereo, navigation, gauges, and engine management control. This monitor has not yet been synced with the PC but it does lamp up. I hooked the system up on my bench to verify that much. I don’t know a ton about these systems but this looks really complete.
Lets sell it all for $1200 (SOLD)
(SOLD) Complete car PC. This screen is a perfect centerpiece for any car! Absolutely beautiful. It is custom made by Mop Top Pros and the craftsmanship is awesome. It has a 10.4" touch screen monitor molded in. This custom work cost Zach over $600 for just the part to be made. Add the Remote controlled monitor and climate control and that alone is more than I am asking for the whole system. The Climate control has been sent to Lextech Lighting and had LED upgrades $$$$$$$ are you seeing the Value?
Now add the PC, the keyboard with ball mouse, the Mobil mouse the GPS and cables and you have a extreme system.
I was considering installing this in my car but have decided I have too much on my plate already. My plan was for it to be my stereo, navigation, gauges, and engine management control. This monitor has not yet been synced with the PC but it does lamp up. I hooked the system up on my bench to verify that much. I don’t know a ton about these systems but this looks really complete.
Lets sell it all for $1200 (SOLD)
Last edited by ScottURnot; 01-22-10 at 11:16 AM.
#5
Lexus Champion
iTrader: (6)
Interested in the GPS receiver for that carputer setup. I'm pretty sure I'm the only person who would be interested since I already have a carputer in mine....haha. Wanted to ask if it is a USB GPS receiver and if you have a picture of this one piece? Looking to change mine out for a newer one.
Trending Topics
#11
Super Moderator
Thread Starter
iTrader: (33)
Join Date: Jul 2004
Location: Sideways on the Yellow Brick Road! < Thats KS!
Posts: 5,827
Likes: 0
Received 4 Likes
on
4 Posts
PM replied
Not sure if I want to break it up just yet.
Can get you pictures tonight, I am not 100% sure on fit as I dont have a VVTI motor to compare. If you want to take some pictures of your stock hdraulic fan pump I mighjt be able to tell for sure.
Buy them.
I will work up a cost, I am guessing to add about $80, the fan is the killer. I could probally get the lenses and toe rods for about $40 via USPS
They were mounted with zipties, a lot of guys do that. The actual mounts look like these, so its only $10
http://www.summitracing.com/parts/MRG-1994/
There is a write up someplace around here on using it, I need to search and try and find you a link. It ends up looking sweet.
Interested in the GPS receiver for that carputer setup. I'm pretty sure I'm the only person who would be interested since I already have a carputer in mine....haha. Wanted to ask if it is a USB GPS receiver and if you have a picture of this one piece? Looking to change mine out for a newer one.
Buy them.
They were mounted with zipties, a lot of guys do that. The actual mounts look like these, so its only $10
http://www.summitracing.com/parts/MRG-1994/
There is a write up someplace around here on using it, I need to search and try and find you a link. It ends up looking sweet.