KS LAST CHANCE! SC400 Complete 1UZ TT Kit! $4k for $12K+ REALLY!
09-06-09, 10:40 AM
#31
There's a bunch of pictures on the first page that show both turbos from different angles with wastegates on both...
Look at the stickers that have L (Left) and R (Right) on them.
Below-Left Turbo w/Wastegate:
Below-Right Turbo w/Wastegate:
Look at the stickers that have L (Left) and R (Right) on them.
Below-Left Turbo w/Wastegate:
Below-Right Turbo w/Wastegate:
Last edited by GZZ-TT; 09-06-09 at 10:49 AM.
09-09-09, 09:20 PM
#34
Pole Position
iTrader: (8)
Join Date: Apr 2009
Location: New Jersey
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
OK, Here it is, The complete custom TT SC400 Kit. Look at the pics, You get everuthing in the pics of it spread out on the drive. Also I have attached a couple install pics for you to get a Idea of the install. Zach if you have any more let me know.
Exhaust manifolds
Exhaust turbo inlet/mounts W/band clamps
Exhaust outlet Y with flex coupler and band clamps
Exhaust down pipe
Exhaust cat
Exhaust mid rear
All custom made aluminum intercooler lines
All couplers to hook up
Front mount intercooler with mounts
Tial BOV
Garrett Turbos
Garrett blankets
Braided lines for water cool center section and oil feeds
Custom hard radiator lines
Custom Thermostat housing (needs welded once in position)
I think thats about it.
$6500 OBO
Exhaust manifolds
Exhaust turbo inlet/mounts W/band clamps
Exhaust outlet Y with flex coupler and band clamps
Exhaust down pipe
Exhaust cat
Exhaust mid rear
All custom made aluminum intercooler lines
All couplers to hook up
Front mount intercooler with mounts
Tial BOV
Garrett Turbos
Garrett blankets
Braided lines for water cool center section and oil feeds
Custom hard radiator lines
Custom Thermostat housing (needs welded once in position)
I think thats about it.
$6500 OBO
. . . . . .
09-14-09, 08:03 PM
#38
Even if a person fabbed everything themselves it would be very hard to get a Twin-Turbo kit together this NICE. Ready to go! This right here saves you alot of money, and ALOT of time. Everyone that came up to the engine bay for the first time after it was installed said -'Oooh Damn, dude!!! Sickkkkk.'-
If you're ready for that, and to win shows left and right, then step up to the plate! ;D
If you're ready for that, and to win shows left and right, then step up to the plate! ;D
10-01-09, 06:54 AM
#43
Super Moderator
Thread Starter
iTrader: (33)
Join Date: Jul 2004
Location: Sideways on the Yellow Brick Road! < Thats KS!
Posts: 5,827
Likes: 0
Received 4 Likes
on
4 Posts
Your stocker would hold a easy 10lbs boost probally a couple more, That would be a heck of a force to be reckened with on the street! Later you could build a motor and crank up the boost more!
