Tons of parts, big and small, post up - if I have it, I will respond
#62
Driver School Candidate
iTrader: (3)
Join Date: Nov 2007
Location: Ohio
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Throttle body
1jz need a replacement throttle body its a chaser motor but im using a soarer harness the TPS bracket is cracked the part that is hooked to the sensor then bolted to the throttle body if i could get this bracket that would work too.
#71
Quote:
Originally Posted by aliga
the car has one lighter.
the tier down, lighter, and center plastic container, 80 shipped
ok sorry for the delay. i am ready to purchase the items above if you still have them and would also like to add in a couple of parts.
passenger door actuator mechanism (my door rod broke no where to be found so i need the whole assembly)
Sc300 5 speed cluster and lastly the key cylinder.
i posted this on the other but dont know if it was active.
Originally Posted by aliga
the car has one lighter.
the tier down, lighter, and center plastic container, 80 shipped
ok sorry for the delay. i am ready to purchase the items above if you still have them and would also like to add in a couple of parts.
passenger door actuator mechanism (my door rod broke no where to be found so i need the whole assembly)
Sc300 5 speed cluster and lastly the key cylinder.
i posted this on the other but dont know if it was active.
#72
Driver School Candidate
Join Date: Jul 2009
Location: CO
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
I need a driver side inside grey door panel w/ master switch rack and pinion assy and passenger inside door handle shipped to 80014. thanks
Last edited by Donyo; 07-11-09 at 03:29 AM.