FS: 2jzge block, GTE parts, boost logic t4 adaptor, 3" piping, LOOK
09-24-08, 06:30 AM
#1
FS: 2jzge block, GTE parts, boost logic t4 adaptor, 3" piping, LOOK
Best offers on everything, need this stuff gone.
Located in Northeast Ohio. Local pickup prices much cheaper.
Pick a part, 2jzge IS300 motor. Anything and everything up for grabs; if not pictured, just ask because I probably have it.
50k miles on the GE motor / parts:
1. Bare short block ready for build - $300 + shipping
2. GE pistons/rods/rings - $150
3. GE intake/exhaust cam shafts - $offer each or pair
4. GE crank = SOLD
5. Head = SOLD
IS300 2jzGE
6. Throttle body minus TPS sensor - $80 shipped
7. OEM injectors - $100 shipped
8. OEM Fuel pump - $40 shipped
9. Water pump - $30 shipped
10. Misc water lines - $offer
11. Oil filter housing - $70 shipped
12. Oil pump - $70 shipped
Misc. sensors, etc.- ask for what you need
http://img91.imageshack.us/img91/9324/gecamsuh0.jpg
http://img220.imageshack.us/img220/2348/geoilplx3.jpg
http://img209.imageshack.us/img209/9480/img2110jo9.jpg
13. W55 5spd tranny gears / internals
All gears, plates etc. in MINT working condition. Complete tranny internals minus speedo ring gear(has sc300). Any offers.
W55 pressure plate - any offer
96 SC300 w58 bellhousing and tailshaft / misc. parts.
14. GE IS300 engine wiring harness. Overall its in usable good condition...couple connectors are missing but I can repair if needed (alternator and one o2). Priced accordingly at $165 shipped.
http://img.auctiva.com/imgdata/2/3/1...47123878_o.jpg
one o2 sensor missing:
http://img.auctiva.com/imgdata/2/3/1...47123918_o.jpg
15. SOLD IS300 GE Ignition Coilpacks complete w/ coils. 50k miles of use, pulled in good working condition. SOLD
16. Boost Logic t4 clock flange. Used to move your turbo for clearance issues. Used but in perfect condition. I think BL is charging $110 for this thing. $60 shipped, OBO
17. 3" polished piping, unused. Thin highgrade steel can be used for exhaust parts as well as intercooler.
Each section $30 shipped or $100 shipped for the four.
18. 4" K&N airfilter. 11" length, has some crimpled finds on the underside but in good usable condition. $25 shipped
19. Ebay dump tube, unused. $25 shipped
20. 2.5" blue silicone elbow. Unused. $15 shipped
21. SOLD-3" blue silicone couplers. Unused. SOLD
22. MAF flange..piping is damaged, maf flange is fine. $20 shipped
23. JDM Aristo GTE misc. items See pic below, more items not pictured - alternator, a/c compressor, power steering pump, water pump, etc. Any offer
A/C Comp and ALT are in pic above.
24. Misc. gaskets and flanges, brand new:
A. T3 flange gasket, $10 shipped
B. T4 flange gasket, $11 shipped
C. GTE exhaust manifold gaskets, $20 shipped
D. 42mm WG gasket, $10 shipped
E. 38mm WG cnc steel flange, $15 shipped
F. T4 cnc steel flange, $22 shipped
G. T3/T4 oil inlet gasket, paper, $2 shipped
SOLD H. Turbo XS manual boost controller, used but condition unknown..looks to be mint. SOLD
Located in Northeast Ohio. Local pickup prices much cheaper.
Pick a part, 2jzge IS300 motor. Anything and everything up for grabs; if not pictured, just ask because I probably have it.
50k miles on the GE motor / parts:1. Bare short block ready for build - $300 + shipping
2. GE pistons/rods/rings - $150
3. GE intake/exhaust cam shafts - $offer each or pair
4. GE crank = SOLD
5. Head = SOLD
IS300 2jzGE
6. Throttle body minus TPS sensor - $80 shipped
7. OEM injectors - $100 shipped
8. OEM Fuel pump - $40 shipped
9. Water pump - $30 shipped
10. Misc water lines - $offer
11. Oil filter housing - $70 shipped
12. Oil pump - $70 shipped
Misc. sensors, etc.- ask for what you need
http://img91.imageshack.us/img91/9324/gecamsuh0.jpg
http://img220.imageshack.us/img220/2348/geoilplx3.jpg
http://img209.imageshack.us/img209/9480/img2110jo9.jpg
13. W55 5spd tranny gears / internals
All gears, plates etc. in MINT working condition. Complete tranny internals minus speedo ring gear(has sc300). Any offers.
W55 pressure plate - any offer
96 SC300 w58 bellhousing and tailshaft / misc. parts.
14. GE IS300 engine wiring harness. Overall its in usable good condition...couple connectors are missing but I can repair if needed (alternator and one o2). Priced accordingly at $165 shipped.
http://img.auctiva.com/imgdata/2/3/1...47123878_o.jpg
one o2 sensor missing:
http://img.auctiva.com/imgdata/2/3/1...47123918_o.jpg
15. SOLD IS300 GE Ignition Coilpacks complete w/ coils. 50k miles of use, pulled in good working condition. SOLD
16. Boost Logic t4 clock flange. Used to move your turbo for clearance issues. Used but in perfect condition. I think BL is charging $110 for this thing. $60 shipped, OBO
17. 3" polished piping, unused. Thin highgrade steel can be used for exhaust parts as well as intercooler.
Each section $30 shipped or $100 shipped for the four.
18. 4" K&N airfilter. 11" length, has some crimpled finds on the underside but in good usable condition. $25 shipped
19. Ebay dump tube, unused. $25 shipped
20. 2.5" blue silicone elbow. Unused. $15 shipped
21. SOLD-3" blue silicone couplers. Unused. SOLD
22. MAF flange..piping is damaged, maf flange is fine. $20 shipped
23. JDM Aristo GTE misc. items See pic below, more items not pictured - alternator, a/c compressor, power steering pump, water pump, etc. Any offer
A/C Comp and ALT are in pic above.
24. Misc. gaskets and flanges, brand new:
A. T3 flange gasket, $10 shipped
B. T4 flange gasket, $11 shipped
C. GTE exhaust manifold gaskets, $20 shipped
D. 42mm WG gasket, $10 shipped
E. 38mm WG cnc steel flange, $15 shipped
F. T4 cnc steel flange, $22 shipped
G. T3/T4 oil inlet gasket, paper, $2 shipped
SOLD H. Turbo XS manual boost controller, used but condition unknown..looks to be mint. SOLD
Last edited by mikellucci; 09-29-08 at 06:16 PM.
09-25-08, 06:03 AM
#5
PMs sent to interested parties..
Sure. On this site in particular - Gunnar, PlatanoTLS, etc. has purchased from me. Tramix has sold to me. 1badsc has sold to me.
JeffTsai knows me from my.is where I have 50 + feedbacks.
Also have numerous feedback / vouches at other toyota/lexus sites under mikkellucci.
Link to my.is since you asked for that before.
http://my.is/forums/itrader.php?u=48273
Thanks.
Sure. On this site in particular - Gunnar, PlatanoTLS, etc. has purchased from me. Tramix has sold to me. 1badsc has sold to me.
JeffTsai knows me from my.is where I have 50 + feedbacks.
Also have numerous feedback / vouches at other toyota/lexus sites under mikkellucci.
Link to my.is since you asked for that before.
http://my.is/forums/itrader.php?u=48273
Thanks.
Trending Topics
10-07-08, 01:39 PM
#15
You can PM me an offer if you want (its unused from BL).What gears are you interested in? The tranny internals are from a w55, IS300. The cam gears are the same car - IS3 2jzge.
Thanks!