A1Lexis

iTrader: (6)

Thought I would post a pic of where the 2 holes are located once the rear "L" is removed. The process is the same as removing the other emblems. Unless your emblems are like PLAYTYM's and dealer installed

Black Pearl installed

76210Guy

Very nice...

UnSub

I really like the black pearl. Where did you buy it?

talwang

iTrader: (4)

Sewell has one set for the 06+ at a closeout price.

http://lexus.sewellparts.com/closeout.html

redliner8

iTrader: (1)

It looks really awesome, especially on white. So it's only glued on? No screws or fasteners in the holes? What did you use to glue it back on?

mandyfig

Why are there 5?

L front, L Rear, Lexus, SC430 what's the 5th?

jimmer!

you have touched on the holy grail of lexus debadging.
very few owners have attempted to mess with this embedded badge.
you've got a set.

A1Lexis

iTrader: (6)

I have a friend that works at a Lexus dealer and I bought it from her.

Yes it's only adhesive/glued on, no screws or fasteners to remove. The emblem has 2 pins and comes with the adhesive (kinda like red 3M tape) already installed.

mandyfig

Did you buy the "L" only for the rear? Did you replace your front grille "L", too?

A1Lexis

iTrader: (6)

I bought only the rear "L" in BP. I removed the front "L" but left the screw attachment on the grille. Only takes a minute to re-install it if I decide swap back.

mandyfig

Care to let us know how much you got it?

So it is basically and take off (remove adhesive) and put on (with new adhesive) for the L logo in the trunk. Did you have to remove the trunk cover? Was there a clip holding the pins that go through the trunk?

talwang

iTrader: (4)

SC and 430 are two separate emblems. lol

A1Lexis

iTrader: (6)

PM me about price.
I used a heat gun to warm up the adhesive, used dental floss between the paint and emblem working it back and forth. Removed the adhesive that was stuck to the paint and cleaned the surface. The emblem comes with tape installed, remove the backing, line up the 2 holes and push firmly. Very easy install! The 2 pins have no backing, clips or other attachments. No need to remove the trunk liner or even open the trunk. I will take a pic of the pins on the old emblem later.

A1Lexis

iTrader: (6)

Here is a pic of the 2 pins on the rear of the L. They both protrude about 1/4" from the back.

JerryB

Hi A1,

You have provided just about every possible amount of info needed for someone that might want to do this also.

As I know nothing about these badges, I have a few questions:

1. This 'Black Pearl,' is that the color that they came in from the dealer?

2. Were these 'Black Pearl' badges an option on some version of the SC430?

3. Other than wanting the unique 'Black Pearl' badging, is there a reason why you did not just paint your original badges black? I also have a white car and would like to have black badges for it.

Thanks for any answers that you might offer,

Jerry Baumchen