Yes

Just hit a patch of black ice on my way to work. Did a 180 and slid into the curb. 3 out of 4 wheels were trashed. Scraped up the side skirt and front bumper, but nothing too bad.

I'll probably be in the market for some new wheels. So if anyone has a set of full-faced wheels similar to my now deceased ones, I might be interested. Or if you've seen any posted for sale.

Didn't have the heart to take any pictures. But I might take a couple when I go by the body shop later today.

VVTiBob

Very sorry to read this, but glad to know you're not physically injured. Fortunately sheet metal and wheels are repairable and replaceable, while you are not. Be safe out there!

donsmith

Very sorry to hear about your ice mishap, something we don't have to worry about here in Houston. I just bought my car last night. I'm going to convert to after-market wheels. The wheels are from a 2002 with only 31k miles. They are near perfect, I think one or two may have had very minor curb rash, easily fixable. I can take pictures if you're interested. I'm not sure how much they're worth, but I'll certainly give you a good deal. Let me know.

m3nv

Ouch sorry to hear about the damage, but at least you're ok

talwang

iTrader: (4)

My old wheels were sold a few months ago, but you can also check these out.

https://www.clublexus.com/forums/whe...ce-wheels.html

https://www.clublexus.com/forums/whe...-03-tires.html

Yes

Thanks guys. I like those Walds. Pretty similar to what I had. That thread is over a year old, but I sent him a message anyway just in case.

SteadyEddy

iTrader: (1)

Sorry to hear about your misfortune, at least you're alright. Now you have an opportunity to get a new set of wheels and change things up a bit.

Yes

here's the damage. i really wish they still made these wheels. i've been searching and they're impossible to find.

SteadyEddy

iTrader: (1)

Have you checked to see if they can be repaired? Are they a three piece wheel? I guess for money just about anything is possible. If you really dig them, I'd check at least. Must be some places fairly close. You might have to get a stock set till they get fixed.

talwang

iTrader: (4)

They look repairable to me.
Or you can PM CL vendor MC3 Wheels to see how much the new lip replacement will cost you.

https://www.clublexus.com/forums/the...omponents.html

Yes

Thanks for the link. I sent him a message. Does a third party make the parts? Because Work discontinued those wheels a while ago. So they no longer sell replacement barrels. I already checked. But that would be awesome if someone else does.

talwang

iTrader: (4)

Only MC3 can answer you that question, but it seems they can do the Work wheels, step lip or reverse lip.

You can also have an option to increase your wheel lip sizes by increasing the widths and decreasing the offsets at the same time, which may be a good thing after all.

scdroptop

iTrader: (1)

Jason-sorry to hear about your accident-thankfully you weren't hurt.

Black ice is more dangerous than regular ice...

Here are some open faced wheels:

http://cgi.ebay.com/ebaymotors/20-WH...Q5fAccessories

The 20" Asanti 139 are very nice...

http://cgi.ebay.com/ebaymotors/20-22...Q5fAccessories

Ned Vo

My set is available. Are you in NE?
20x9 F +30
20x10.5 R +29
BBK friendly
BNIB never used or mounted
Maya center cap and chrome valve are included. This set came from Dazz.
They are very rare. Maya (Trafficstar) STM Made in Japan. LMK
$2800.00
Ned

Lexiss_sc430

iTrader: (2)

Im sorry to hear about your misfortune, we have a few sets of wheels that will fit your Sc at our shop, we have a set of l-sport line wheeles, the 5 spoke design. If your interested just let me know.

shoot me a pm and ill give you my cell.