SC430 - 2nd Gen (2001-2010)

Navagation problem

Thread Tools
 
Search this Thread
 
Old 06-01-10, 07:40 AM
  #1  
Harley558
Driver School Candidate
Thread Starter
 
Harley558's Avatar
 
Join Date: May 2010
Location: Massachusetts
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default Navagation problem

I have a 2002 SC430. I recently purchased it with only 20,000 miles on it. I was using the navigation and everything was working great except it didn't find a lot of roads. I checked the DVD and found I have Version #1. I read this forum and went out and purchased Version 9.1 for Generation 2/3. I purchased an original disk off of eBay from someone who accidentally purchased it for generation 4. I installed it and everything appeared to be fine. I looked at the DVD on screen and it does state I have version 9.1. However, when I went to use it and pressed the destination button and the destination screen appears, I cannot press on the address button. It does turn color and make the noise as if you were selecting it, however, nothing happens. I tried and tried. Then I thought I may have the wrong area and noticed I can't access the area (Map 1-7-8 whatever it goes up too). What do I do?????
Old 06-01-10, 07:46 AM
  #2  
VVTiBob
Moderator
 
VVTiBob's Avatar
 
Join Date: Dec 2009
Location: CA - San Diego
Posts: 3,135
Received 265 Likes on 201 Posts
Default

Did you select the proper area of the U.S.? It's broken down into about 6 geographic areas. When I install my new disc if defaulted to D.C. area and I live in California. Additionally the NAV system does not allow you to enter info while the car is moving more than one or two mph everything grays out...
Old 06-01-10, 07:53 AM
  #3  
VVTiBob
Moderator
 
VVTiBob's Avatar
 
Join Date: Dec 2009
Location: CA - San Diego
Posts: 3,135
Received 265 Likes on 201 Posts
Default

You may want to read this thread and specifically comment #8 in it... https://www.clublexus.com/forums/sc-...on-system.html
Old 06-01-10, 06:26 PM
  #4  
Harley558
Driver School Candidate
Thread Starter
 
Harley558's Avatar
 
Join Date: May 2010
Location: Massachusetts
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default

VVTiBob,

I can't select any area.... It is for Gen. 2/3 and it does read 9.1 on the screen....the map comes up, however, I can't pick a destination....it beeps when i put my finger on destination, however, nothing happens......
Old 06-01-10, 08:55 PM
  #5  
VVTiBob
Moderator
 
VVTiBob's Avatar
 
Join Date: Dec 2009
Location: CA - San Diego
Posts: 3,135
Received 265 Likes on 201 Posts
Default

well lets check your DVD ... it may be a bad copy...copy don't seem to work correctly.

do this in the exact order

Press menu and then press option
then touch the top left of the screen, bottom left, top left and bottom right

the debug screen will appear

Check the version number and settings. should be 9.1

press override and try again.
Old 06-04-10, 08:06 AM
  #6  
Harley558
Driver School Candidate
Thread Starter
 
Harley558's Avatar
 
Join Date: May 2010
Location: Massachusetts
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default

VVTiBob: I tried what you stated, however, not sure if that works on the generation 2/3
I did click on Menu, however, no options come up? I can't pick my region, etc.... When I click on menu, I get the navation screen or destination screen. Up in the top right of the screen it states DVD. I click on the DVD and I get the message I am using Ver 09.01
I tired ejecting the DVD and re-installing it. It is an original DVD disk. Again, when I click on destination and click on address, it highlights it, however, nothing happens......
Old 06-04-10, 08:08 AM
  #7  
Harley558
Driver School Candidate
Thread Starter
 
Harley558's Avatar
 
Join Date: May 2010
Location: Massachusetts
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default

Ionfrank: I get the part about ebay, however, after that, don't know what you're trying to say?
Old 06-07-10, 03:36 PM
  #8  
Harley558
Driver School Candidate
Thread Starter
 
Harley558's Avatar
 
Join Date: May 2010
Location: Massachusetts
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default

Still can't get my navigation to work.... It's an original disk.... however, just to see if I have a bad disk, I went to my local Toyota Dealer... Was going to try one of theirs and if it worked I would be a new one..... However, they said Lexus has a different part number (PT219-GEN23-09) then Toyota (86271-33038) and it won't work in a Lexus. He said I have to purchase the Lexus one they are not interchangeable?????????
Old 06-07-10, 04:34 PM
  #9  
PHXSC
Lead Lap
 
PHXSC's Avatar
 
Join Date: Jun 2008
Location: Arizona
Posts: 465
Likes: 0
Received 1 Like on 1 Post
Default

Buy a new disc from Sewell, and consider the money you spent on the ebay disc gone, even if you think it's original or whatever reason they gave you for selling it.
I haven't heard of any disc for these cars purchased from ebay working.
Old 06-08-10, 06:52 AM
  #10  
tfischer
Moderator
 
tfischer's Avatar
 
Join Date: Feb 2001
Location: Cincinnati
Posts: 3,615
Received 192 Likes on 145 Posts
Default

If you search this forum for posts on this topic, you will find that rule #1 is don't buy a disc from eBay; there is too high a chance that you will get something false, faulty or fraudulent. I have bought a lot of stuff via eBay over the years, but I would not buy a NAV disc anywhere but from a dealer (e.g.: Seawell, noted above) because of the high risk.
Old 06-08-10, 05:11 PM
  #11  
Harold57
Lead Lap
 
Harold57's Avatar
 
Join Date: Aug 2006
Location: Texas
Posts: 4,759
Received 409 Likes on 359 Posts
Default

Harley,
First of all, welcome to the forum.

If you have a relationship with a dealer, you might ask them to check out the disk. If you have a warranty, they might just swap it out for you.

I don't believe that the Lexus and Toyota disks are different. They will have different part numbers because one will come up with the Lexus logo and the other with the Toyota logo. But other than that, I think they are the same, but I have no experience to prove that.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Nguyen15
GS - 3rd Gen (2006-2011)
2
05-07-17 01:11 PM
bburns
Car Chat
3
07-22-10 05:25 PM
ACleanSC4
RX - 1st Gen (1999-2003)
1
10-23-07 08:47 PM
wrfahmy
SC430 - 2nd Gen (2001-2010)
3
11-28-06 03:13 PM
Mari55
IS - 2nd Gen (2006-2013)
2
02-09-06 12:38 PM



Quick Reply: Navagation problem



All times are GMT -7. The time now is 04:36 PM.