400+hp
#5
Lexus Fanatic
iTrader: (2)
With headers, exhaust, LSD/gears, intake, TC, and computer I beat the snot out of 545 BMWs and 996 Porsche's all day long. Is is not the HP but how it is put to the ground that is important.
If you are looking for 400hp then FI is the answer. Find a nice RMM kit for sale, would require some mods to make the piping fit as the front of the SC is different than the GS and run a smaller pulley.
My GS made over 389 at the wheels or 486 at the crank with the RMM kit.
If you are looking for 400hp then FI is the answer. Find a nice RMM kit for sale, would require some mods to make the piping fit as the front of the SC is different than the GS and run a smaller pulley.
My GS made over 389 at the wheels or 486 at the crank with the RMM kit.
#6
With headers, exhaust, LSD/gears, intake, TC, and computer I beat the snot out of 545 BMWs and 996 Porsche's all day long. Is is not the HP but how it is put to the ground that is important.
If you are looking for 400hp then FI is the answer. Find a nice RMM kit for sale, would require some mods to make the piping fit as the front of the SC is different than the GS and run a smaller pulley.
My GS made over 389 at the wheels or 486 at the crank with the RMM kit.
If you are looking for 400hp then FI is the answer. Find a nice RMM kit for sale, would require some mods to make the piping fit as the front of the SC is different than the GS and run a smaller pulley.
My GS made over 389 at the wheels or 486 at the crank with the RMM kit.
computer? did I miss this mod? I usually read everything you write.
#7
Lexus Test Driver
Trending Topics
#9
Pole Position
iTrader: (1)
Noobish question...
What is an RMM kit?
With headers, exhaust, LSD/gears, intake, TC, and computer I beat the snot out of 545 BMWs and 996 Porsche's all day long. Is is not the HP but how it is put to the ground that is important.
If you are looking for 400hp then FI is the answer. Find a nice RMM kit for sale, would require some mods to make the piping fit as the front of the SC is different than the GS and run a smaller pulley.
My GS made over 389 at the wheels or 486 at the crank with the RMM kit.
If you are looking for 400hp then FI is the answer. Find a nice RMM kit for sale, would require some mods to make the piping fit as the front of the SC is different than the GS and run a smaller pulley.
My GS made over 389 at the wheels or 486 at the crank with the RMM kit.
Thread
Thread Starter
Forum
Replies
Last Post
Lexy GS430
GS - 2nd Gen (1998-2005)
23
09-13-05 08:12 PM