20" Wheels and Offsets
#1
Driver School Candidate
Thread Starter
Join Date: Aug 2007
Location: Ontario
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
20" Wheels and Offsets
Hey guys I'm about to order some MRR GT-1's but they come in so many sizes I got a little confused.
I wanted to get the following:
Rear:
Size 20x10
Bolt Pattern 5x114.3
Offset 25
Finish Chrome
Front:
Size 20x8.5
Bolt Pattern 5x114.3
Offset 35
Finish Chrome
However the rear and also come in the following.
Rear:
Size 20x10
Bolt Pattern 5x114.3
Offset 43
Finish Chrome
I'm not sure what the fitmit is for the SC430, and the guide got me a little confused (my english is not that good). Any suggestions? And what tire sizes should I be running. Thanks a lot guys!
Here's a picture of the wheels.
I wanted to get the following:
Rear:
Size 20x10
Bolt Pattern 5x114.3
Offset 25
Finish Chrome
Front:
Size 20x8.5
Bolt Pattern 5x114.3
Offset 35
Finish Chrome
However the rear and also come in the following.
Rear:
Size 20x10
Bolt Pattern 5x114.3
Offset 43
Finish Chrome
I'm not sure what the fitmit is for the SC430, and the guide got me a little confused (my english is not that good). Any suggestions? And what tire sizes should I be running. Thanks a lot guys!
Here's a picture of the wheels.
Last edited by hun6; 08-20-07 at 05:21 PM.
#2
Hun6,
I have found the wheel fitment thread at the top of our forum to be pretty accurate.
It has 8.5" at a 18 offset and 10" at a 24 offset. The 35 offset for the front will put the outside rim further in, away from the fender. More than I would like to see. The 25 for the rears looks like a pretty good fit.
I am running 20's x 9" in the front with a 28 offset and 20's x 11" in the rear with a 33. No fender mods but the lining has to be trimmed.
Mark (da-bizket)
I have found the wheel fitment thread at the top of our forum to be pretty accurate.
It has 8.5" at a 18 offset and 10" at a 24 offset. The 35 offset for the front will put the outside rim further in, away from the fender. More than I would like to see. The 25 for the rears looks like a pretty good fit.
I am running 20's x 9" in the front with a 28 offset and 20's x 11" in the rear with a 33. No fender mods but the lining has to be trimmed.
Mark (da-bizket)
Thread
Thread Starter
Forum
Replies
Last Post