wheel to fender fitment question
#1
Driver School Candidate
Thread Starter
Join Date: Dec 2004
Location: Virginia
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
wheel to fender fitment question
alrite, i have done some searching, and i have also read the sticky on wheel fitment, but i cant seem to find a definite answer on what offset will have the wheel sit flush with the fender so that the wheels dont appear to be sunken in. does anybody know if the offsets in the fitment guide are correct for that?
#2
Lexus Fanatic
iTrader: (2)
I am running 20mm offsets and they sit flush with the car. Some old pics of my car below.
https://www.clublexus.com/forums/sho...ghlight=offset
https://www.clublexus.com/forums/sho...ghlight=offset
Last edited by Pearlpower; 10-09-06 at 05:16 PM.
#5
Moderator
iTrader: (4)
What you are looking for are clearly stated there.
F: 19x9 +24
R: 19x10 +24 or 19x10.5 +30
Just do what Rominl suggests in his fittment guide and you will be all right.
Don't expect to find cheap wheels with those specs on Ebay, it is much safer to order them through CL vender here.
Correct me if I am wrong.
Bascially, Rominal's guide is telling us the position of the outside edge of the new wheel can extend additionally up to 34mm/front and 47mm/rear with the right combinations of wheel width, offset and tire size.
Thread
Thread Starter
Forum
Replies
Last Post