Supra Twin Turbo brakes install on SC430
#31
Driver
iTrader: (3)
Sorry to bring up an old thread but I was talking to a friend of mine who has sold his Soarer and has a set of Supra TT front brakes and rotors that he originally wanted to mount on the Soarer.
I told them that I'll be interested to take it off his hands only if its a simple direct fit to the SC430.
Anyone got any pictures of this setup.
I told them that I'll be interested to take it off his hands only if its a simple direct fit to the SC430.
Anyone got any pictures of this setup.
I already have a set from my 1994 Supra TT but i have not installed them yet.. Waiting for my factory discs/pads to need replacing first.
Best of luck
#36
Is this the right replacement part number?
a1 cardone.
Part Number: A1191893
Manufacturer Number: 19-1893
or Centric P/N 141.44167 Right 141.44168 Left
a1 cardone.
Part Number: A1191893
Manufacturer Number: 19-1893
or Centric P/N 141.44167 Right 141.44168 Left
Last edited by fj40ih8mud; 04-02-13 at 06:23 PM.
#38
I am assembling parts to do the upgrade. Front brake flex lines, can I get the stock lines, or do I need a longer line to allow for the larger diameter rotors thus caliper is further out or not?
#43
Ok, got my calipers all cleaned up and powercoated, Look great. Went to install everything this weekend, and my new stoptech rotors seem to have too much of a offset to them. Anyone have pictures of the install that would show me how much offset I should have.
Mine have about 2" of offset.
I bought rotors to fit the TT supra. If anyone has part number to what works, I would appreciate it.
Thanks,
Mine have about 2" of offset.
I bought rotors to fit the TT supra. If anyone has part number to what works, I would appreciate it.
Thanks,
#44
Lead Lap
iTrader: (1)
Ok, got my calipers all cleaned up and powercoated, Look great. Went to install everything this weekend, and my new stoptech rotors seem to have too much of a offset to them. Anyone have pictures of the install that would show me how much offset I should have.
Mine have about 2" of offset.
I bought rotors to fit the TT supra. If anyone has part number to what works, I would appreciate it.
Thanks,
Mine have about 2" of offset.
I bought rotors to fit the TT supra. If anyone has part number to what works, I would appreciate it.
Thanks,
I haven't taken pics with the wheel off but here is a few to help.. if you have about 45mm to 50 mm space from back of wheel spoke to edge of mounting face of the wheel you will be perfectly fine!
as for stoptech rotors this is what i got:
Front Left: 120.44103
Front Right: 120.44104
ill stick an inch tape in wheel tomorrow and post more pics ..
#45
Hey,
I haven't taken pics with the wheel off but here is a few to help.. if you have about 45mm to 50 mm space from back of wheel spoke to edge of mounting face of the wheel you will be perfectly fine!
as for stoptech rotors this is what i got:
Front Left: 120.44103
Front Right: 120.44104
Attachment 340122
Attachment 340119
Attachment 340118
Attachment 340123
ill stick an inch tape in wheel tomorrow and post more pics ..
I haven't taken pics with the wheel off but here is a few to help.. if you have about 45mm to 50 mm space from back of wheel spoke to edge of mounting face of the wheel you will be perfectly fine!
as for stoptech rotors this is what i got:
Front Left: 120.44103
Front Right: 120.44104
Attachment 340122
Attachment 340119
Attachment 340118
Attachment 340123
ill stick an inch tape in wheel tomorrow and post more pics ..