fx35 wheels
05-24-13, 08:06 PM
#1
Driver School Candidate
Thread Starter
Join Date: Jan 2013
Location: OR
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
fx35 wheels
Hey there all-
I have been searching the web for a set of 2010 FX35 on an SC400 and I have found nothing...
The dimensions are 18" with a +50 offset, thoughts on placing these on my '93 SC400?
I have been searching the web for a set of 2010 FX35 on an SC400 and I have found nothing...
The dimensions are 18" with a +50 offset, thoughts on placing these on my '93 SC400?
05-24-13, 09:17 PM
#4
Lead Lap
iTrader: (1)
Join Date: Feb 2008
Location: I.E Southern California to SA,Texas
Posts: 4,447
Likes: 0
Received 5 Likes
on
5 Posts
Those look like 20s in the picture. Maybe its just the angle. Lug pattern is the same as the SC but not sure they will fit on the hubbore. Let us know how it goes tho 
05-24-13, 09:29 PM
#5
Driver School Candidate
Thread Starter
Join Date: Jan 2013
Location: OR
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Good point Joey.
Dammit OLT, right again
I'll try to find the pic of the ones I am looking at and post it -
Why the heck I can't find another pic of these already done on the WEB is beyond me -
Does this idea suck that bad?
Dammit OLT, right again
I'll try to find the pic of the ones I am looking at and post it -
Why the heck I can't find another pic of these already done on the WEB is beyond me -
Does this idea suck that bad?
Trending Topics
05-25-13, 12:12 AM
#8
Lead Lap
iTrader: (8)
Join Date: Nov 2011
Location: Jersey
Posts: 622
Likes: 0
Received 0 Likes
on
0 Posts
Seen them on a solara or accord coupe, forgot which but they looked horrible. I know they're not SCs but kinda similar. Check out the 10spoke toyota venza 19in wheels, would cost the same but would look epic. Was going to get a set but they need inserts to fit and too lazy to get it done lol.
05-25-13, 08:44 AM
#12
Driver School Candidate
Thread Starter
Join Date: Jan 2013
Location: OR
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Uras, are those spacered?
And the pic I posted of just the wheels are 20's then?
They don't look like the first gen ones you posted... Seems like they came in both an 18 and a 20 in that same design with the curved then the flat like the ones that I posted...
And the pic I posted of just the wheels are 20's then?
They don't look like the first gen ones you posted... Seems like they came in both an 18 and a 20 in that same design with the curved then the flat like the ones that I posted...
05-25-13, 12:49 PM
#13
Driver School Candidate
If you check again the 18" version of the rim has 7 spokes and the 20" has 8 spokes. Also on the 20's there is a difference in the outer edge of the rim towards the tire. The spoke has a sort of "flare/curvature" to it!
05-25-13, 12:53 PM
#14
Driver School Candidate
I take that back, after further review the OPs original post are a pic of the 18s that came on newer fx's. there is also a 20inch version but it doesn't have the curve at the edge of the rim.
05-25-13, 11:03 PM
#15
15mm spacers in the back.
Refer to this thread: https://www.clublexus.com/forums/sc-...t-a-pic-6.html
You might want to try google for your answer for FX wheels. After all, this is an SC forum.
Refer to this thread: https://www.clublexus.com/forums/sc-...t-a-pic-6.html
You might want to try google for your answer for FX wheels. After all, this is an SC forum.