chnk

iTrader: (12)

lower the car more you need more natural negative camber the fenders can be pulled out and flared a little

313sc3

From what I've seen, wobble bolts are for cars that use bolts to attach the wheel to the rotor. Not our cars which have bolts drilled in and lugs. So that's outta the question. Go with a redrill or wide body fenders.

3L4jzz31

iTrader: (2)

Or if you don't want to do any of the above there's always fender flares

(pulled this from one of the sc fender flare threads)


Warning: this could get you flamed lol

Aron9000

I'm already going to flame him for spray painting his badges while they were on the car. Seriously WTF . . . . .

I'd get the wheels redrilled, they should fit nice without the 1" adapater.

Supruxes

iTrader: (2)

I assumed it was Plasti-dip.

CalitriSC

iTrader: (13)

Just have them redrilled like many have said. I would never use wobble bolts on an SC. Nice wheels though.

xxtoobsxx

iTrader: (4)

Lower and camber, roll and a lil pull. I had more poke than that and mine fit just fine...now! lol. But thats permanent mods, so if you plan on getting a new set they are going to have to be fairly aggressive. If your not wanting that then just get new wheels now.

SClean93

Lol this was a case of friends thinking it would be funny to plastidip the back of my car before I knew it could peel off

So I'm guessing these wobble nuts are the wrong application for a sc and I will look into re-drilling. Around what cost should I be looking for, for someone to do it right

MKIVS374

iTrader: (2)

Is that what all that **** was from on the back lol. Dude just get some wheels that fit your car. Looks wack with some skinn wheels on the back just to have them. Sell them and get same ones that are made for your car.

Kohinoor

iTrader: (22)

wobble (also called variation) lugs or bolts (both exist) will only work from 5x112/5x114.3, 5x110/5x112, etc. the max variation is 2.5mm, they cant move 6mm. redrill them and be happy.

93Gotjuice

iTrader: (6)

Ive redrill 3 sets now. My buddy owns a shop and what he charges me is 120 for all 4 wheels.

thm8d

iTrader: (3)

Your best choices are:
1) Re-drill to 5x114.3
2)Smaller tires and more camber
3) Flare/pull fenders and camber

What size adapters are you running?

jadu

iTrader: (42)

slap on overfenders and call it a day

xHypnofish

iTrader: (1)

Re drill, Safest, and easiest way to have them fit.

8BitSinner

Id say go re-drill. Ive had a set of re-drilled before,nothing wrong with it... Or wide body.