S142jz

iTrader: (2)

Can anyone fill me in on how to fix this issue. I know our doors are heavy and after time they tend to sag. Don't know if taking it to body shop is the best option. Thank you

1JZPWRD

iTrader: (59)

The door hinge is prolly going bad. I would just replace the door or try to tighten the bolts securing it to the frame and door and see if it helps.

durps

iTrader: (8)

Get a jack and lift the door up up a bit in the center of it. Then loosen the bolts on hinge, dont remove. Then jack door to desired height. Tighten bolts and then you should be good. Thats what I did. You can use the oem jack if you dont have a reg hydraulic jack.

kinch09

iTrader: (10)

is it hitting your fender when you open it? mine does and ive wondered about this, its chipped paint off of it already

SC400slide

iTrader: (11)

Just keep in mind, any fix you have done to the hinge, it will most likely be a temporary fix. Getting a new one would probably be costly, but having to re adjust the hinge is also a hassle.

1JZPWRD

iTrader: (59)

You can get a new used one for around 50 from what I have seen them before on here.

1sWt2GS

iTrader: (6)

this works for sure