DIY Tilt Steering repair in detail
#22
Lead Lap
iTrader: (2)
Here's a bump.
I just had this issue after replacing my alternator. I guess the steering wheel was resetting or something and caused it to go off gear.
For a washer, here's what I used:
It's a plastic brake disc off of my HPI Racing Nitro RS4 3 R/C car. I put one behind the blue gear and now it sits perfectly.
I just had this issue after replacing my alternator. I guess the steering wheel was resetting or something and caused it to go off gear.
For a washer, here's what I used:
It's a plastic brake disc off of my HPI Racing Nitro RS4 3 R/C car. I put one behind the blue gear and now it sits perfectly.
#25
Driver School Candidate
YEah I did my TRUNK STRUTS and by the time I figured out the retainer clips really worked the way I was convinced they didn't
I already had messed them up. BEND, then BEND BACK into place. That simple.
ow I always close my trunk from the middle, or else one of the struts will pop off
the mounting bolt. LOL
I already had messed them up. BEND, then BEND BACK into place. That simple.
ow I always close my trunk from the middle, or else one of the struts will pop off
the mounting bolt. LOL
Thread
Thread Starter
Forum
Replies
Last Post
PowerLINK
SC- 1st Gen (1992-2000)
2
06-17-10 09:12 AM