$300 Dollar SC 400
#76
Driver
Thread Starter
Join Date: Oct 2012
Location: TX
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the input...Yes the old belt "squealed" too. I agree with you on belt conditioner...I don't like it but it quiets it down for a short time. I have visually check the alignment and every pulley appears to be lined up. I will take a hard look at the tensioner. Since you experienced the same symptoms it probably is the culprit. As far as the radio it worked fine when we started this project but some it will not turn on. Will check connections again but I suspect there is a capacitor or something dried up. Seems like I have heard other SC guys having the same issue
#77
Lexus Test Driver
iTrader: (17)
Join Date: Sep 2003
Location: Texas
Posts: 849
Likes: 0
Received 0 Likes
on
0 Posts
The serpentine tensioner on the SC300 has factory marking on the front face of it to tell you if the internal tension spring is beginning to lose it's preset tension. I am not sure how it is on your 400 but if you have the factory manual it will show you how to perhaps check it. Those internal springs do loose their tension over time/mileage.
#78
I was under the impression that you swap out the tensioner with the belt for piece of mind? did you reuse the tensioner when you changed the belt? not sure about the radio.
awesome find and project btw! hands on learning about cars from the ol' man is priceless. $300 or not.
I never got the chance R.I.P.
awesome find and project btw! hands on learning about cars from the ol' man is priceless. $300 or not.
I never got the chance R.I.P.
#79
I believe that is the kit Ebay user exotikleather sells. They sell synthetic kits and leather kits as well. This is the link to their complete leather kit http://www.ebay.com/itm/400566753839...84.m1423.l2649 . My opinion is it looks great for the price but if you're looking for a more OEM look leatherseats.com is the way to go.
#80
My SC3 was $1500, with 228K, and I was happy. I'm still happy, with maybe another $800 into it --- and around 300 hours. I wish my dad did something like that with me. Your boy is very blessed.
#86
Pole Position
Join Date: Jun 2013
Location: California
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
Exterior looks pretty clean. Interior looks a bit messy but still not bad for such an old car!
Your son is so lucky! Hope you have fun with this project,
I do wish my dad loved cars as much as you do.
Your son is so lucky! Hope you have fun with this project,
I do wish my dad loved cars as much as you do.
#87
Driver
Thread Starter
Join Date: Oct 2012
Location: TX
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Yep we have scrubbed and scrubbed the carpet we can't seem to get some of the stains out. However, for some reason the pictures look worse than it does in real life.
#88
In Recovery Mode
iTrader: (11)
IDK if this is what you're doing but take the carpeting completely out and soak it with water with soap. Rinse it thoroughly, then get out the hand held carpet steam cleaner, and just suck away at the carpeting. Did it on my 96 Explorer and it makes the carpeting look brand stinking new. You'll also find a couple bucks in coins under there...
#90
Driver
Thread Starter
Join Date: Oct 2012
Location: TX
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Low oil level light
Update on our $300 SC 400. My son got his license in Dec 14, loves driving the car. 4k miles since it was "reborn" in our garage 18 month ago. Almost all the miles were driven by him with me in the right seat teaching him to drive. However we have a new issue. The low oil level sensor illuminates on hard left turns only. Oil level is good and only on hard left turns...any ideas?