When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Alright my friends sc300 signals dont work but his hazards do work. Fuses look fine for the signals, hazards work so there probably inst a short anywhere, replaced the relay for the turn signals and still nothing. Ive even removed the steering wheel and the entire casing.
still have no clue whats up, anyone got any ideas??
Alright my friends sc300 signals dont work but his hazards do work. Fuses look fine for the signals, hazards work so there probably inst a short anywhere, replaced the relay for the turn signals and still nothing. Ive even removed the steering wheel and the entire casing.
still have no clue whats up, anyone got any ideas??
Originally Posted by megamax
well i have the opposite problem. my hazards don't work but my turn signals do. so iam kinda in the same boat..
Y'all should try what I did. I removed my headlights and checked the wirings. Remove the bulbs and check the connectors. Wires and connectors can crimped overtime.
Originally Posted by BlakOnBlak
Can i join the party? Hazards dont work and my signals blink really fast. I dont mind the fast blinking, however I would prefer normal speed.
Did you switch out tail lights from another year SC? That maybe the case since I have a 94 and switched to 95-96 and the blinking is fast due to the resisitors having a higher impedance than my old ones.
Y'all should try what I did. I removed my headlights and checked the wirings. Remove the bulbs and check the connectors. Wires and connectors can crimped overtime.
Did you switch out tail lights from another year SC? That maybe the case since I have a 94 and switched to 95-96 and the blinking is fast due to the resisitors having a higher impedance than my old ones.
Yep! Thats the same thing I did except mines went from 92 switched to 95.