View Poll Results: What composite do you want the Auto C front bumper to be?
Duraflex
28
25.23%
Full Carbon Fiber
18
16.22%
Urethane
65
58.56%
Voters: 111. You may not vote on this poll
Auto C Front Bumper in Urethane? Carbon? Duraflex?
#33
Lexus Test Driver
iTrader: (5)
Right on. It doesn't need to be super fancy, but something like the Z06 diffuser here that incorporates into the SC rear bumper. However, it should be a full diffuser, but not a cheesy 1 piece in the middle.
Or something similar like the diffuser of S2000 here that goes from left to right.
The lip from Extreme that's like Vertex or Jic..etc is too plain. It should be something different with a little of exotic look and cleanliness.
Or something similar like the diffuser of S2000 here that goes from left to right.
The lip from Extreme that's like Vertex or Jic..etc is too plain. It should be something different with a little of exotic look and cleanliness.
Last edited by stevechumo; 05-17-12 at 02:35 PM.
#37
Pole Position
Join Date: Mar 2010
Location: California
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
I've heard both good andbad about duraflex, and it's hard to argue for the price. however, a truly sturdy urethane replica would be fantastic for around 5-600 bucks. 7-800 is a harder sell, despite the quality.
I'd go either route to be honest, this is a sexy bumper no doubt.
as for the crossbar, I think I prefer it without.
just need another SC.... >.>
I'd go either route to be honest, this is a sexy bumper no doubt.
as for the crossbar, I think I prefer it without.
just need another SC.... >.>
#39
Lexus Fanatic
iTrader: (2)
Honestly guys, FRP (fancy word for lightweight flexible fiberglass) is the best material. There is quite a reason why you don't see urethane kits with the exception of super expensive kits like the Porsche Techart and other kits in that league.
1. OEM vs Aftermarket urethane is no comparison unless you are talking about high end stuff like Tech-Art, Brabus etc.
2. Unless the fitment is dead on perfect, urethane is more difficult to work with
1. OEM vs Aftermarket urethane is no comparison unless you are talking about high end stuff like Tech-Art, Brabus etc.
2. Unless the fitment is dead on perfect, urethane is more difficult to work with
#40
Instructor
iTrader: (5)
FRP is still not nearly as strong as urethane. Urethane handles blows very well. Even the fancy FRP behaves like the cheapo ebay fiberglass when something hits it.
I've splintered too many fiberglass bumpers and side skirts at autox (two of those being Shine replica Amuse pieces) meanwhile a Mustang I built has an ebay special $250 replica urethane front bumper on it and it takes the blows with nothing more than a scuff from the cones. It's worth the extra prep work.
Oh and put me down for a front bumper in Urethane. Need to work on that price by ALOT but I'm definitely interested.
I've splintered too many fiberglass bumpers and side skirts at autox (two of those being Shine replica Amuse pieces) meanwhile a Mustang I built has an ebay special $250 replica urethane front bumper on it and it takes the blows with nothing more than a scuff from the cones. It's worth the extra prep work.
Oh and put me down for a front bumper in Urethane. Need to work on that price by ALOT but I'm definitely interested.
#44
Lexus Test Driver
iTrader: (5)
That's a good question. It really depends on how you design it. First choice is a full rear diffuser will look good on SC OEM rear bumper. A 2nd choice is a smaller mid section diffuser will look good on a lip kit, if the lip kit is caved in is to hug the diffuser. The 2nd choice will look more badass. Lol.