Avital remote start issue on sc400
09-29-11, 07:01 PM
#1
Driver School Candidate
Thread Starter
Join Date: Sep 2011
Location: Il
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Avital remote start issue on sc400
Okay, so on my 400 I have an avital remote start but whenever I start my 400 with it the theft alarm goes off. Any ideas? Appreciate the tips.
Thanks
Thanks
09-29-11, 07:33 PM
#2
Pole Position
iTrader: (1)
Join Date: Oct 2008
Location: Rhode Island
Posts: 392
Likes: 0
Received 0 Likes
on
0 Posts
this should help
1992-1993 sc400
http://www.the12volt.com/installbay/...tail/1297.html
1994 sc400
http://www.the12volt.com/installbay/...tail/1298.html
1995-1997 sc400
http://www.the12volt.com/installbay/...tail/1299.html
1992-1993 sc400
http://www.the12volt.com/installbay/...tail/1297.html
1994 sc400
http://www.the12volt.com/installbay/...tail/1298.html
1995-1997 sc400
http://www.the12volt.com/installbay/...tail/1299.html
09-29-11, 07:44 PM
#3
Driver School Candidate
Thread Starter
Join Date: Sep 2011
Location: Il
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
this should help
1992-1993 sc400
http://www.the12volt.com/installbay/...tail/1297.html
1994 sc400
http://www.the12volt.com/installbay/...tail/1298.html
1995-1997 sc400
http://www.the12volt.com/installbay/...tail/1299.html
1992-1993 sc400
http://www.the12volt.com/installbay/...tail/1297.html
1994 sc400
http://www.the12volt.com/installbay/...tail/1298.html
1995-1997 sc400
http://www.the12volt.com/installbay/...tail/1299.html
09-30-11, 03:01 AM
#4
Driver
iTrader: (1)
Join Date: Nov 2006
Location: AZ
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
your remote start isnt hooked up to the disarm factory anti theft, so when it starts it thinks someone is trying to steal it
your remote start should have a out put wire that needs to be connected to that
Factory Disarm Green (-) Driver's Kick Panel
10-01-11, 08:08 PM
#5
Driver School Candidate
Thread Starter
Join Date: Sep 2011
Location: Il
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
So how would I go upon fixing it? I really need help guys, I want my remote start to work! Haha
10-01-11, 08:54 PM
#6
Pole Position
iTrader: (1)
Join Date: Oct 2008
Location: Rhode Island
Posts: 392
Likes: 0
Received 0 Likes
on
0 Posts
look at the alarm manual it should have a output wire that says factory alarm disarm connect that wire from the alarm module to the factory disarm green(-) wire located at the driver kick panal
10-02-11, 02:00 AM
#7
Driver
iTrader: (1)
Join Date: Nov 2006
Location: AZ
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
so if you installed it yourself and wanting to fix it and didnt see this part? how did you wire the rest of it?
If you had it done at a shop i would take it back and be like hello fix please.
If you had it done at a shop i would take it back and be like hello fix please.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
