When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Same question as above. How big is your spacer? I'm currently using 25mm spacers but am about to tone it down to 15mm. I only run my stocks during the winter and was hoping to swap to my 19"s soon. In fear of a blowout and having to run the spare, I want to know what size spacer will be needed to run LS brakes.
I assume you are running V1 style spacers with extended studs correct? The V2 style has bolts that do not sit flush within the spacer holes.
www. ichibausa.com it came with 10 long studs and 2 15mm spacers. And I had stoptech brake line to install but it didn't fit on to hard line so I'm going to return it and they are going to see if they can send me the right one.
www. ichibausa.com it came with 10 long studs and 2 15mm spacers. And I had stoptech brake line to install but it didn't fit on to hard line so I'm going to return it and they are going to see if they can send me the right one.
Gottchya, you have Version 1's then (probably the safer set too). Are you running spacers in the rear too?
Version 1 has extended studs. You have to remove all of your existing studs and install the longer ones as you did. Version 2 has studs built into the spacer already. Visit the ichiba website and it will show you.