eliteskill

iTrader: (8)

My Sunday Project.. Teasers.. =)




I have about 5 hours of sunlight to finish them and then mount and adjust lets see if I can get them from this...


To this..


Good way to make those foglights into something more useful to light the road.



STEP BY STEP DIY:

Tools/Parts Needed:

97+ Foglights
HID Blazer Foglights from retrofitsource.com
880 6000k HIDs
Heat Gun/Oven
Screwdrivers
Dremel
Grinder
Silcon Glue/Rubber Hoses
A Whole DAY of work and beer =)

1) Take your fog lights off your car.. if you dont know how to do this.. search the forums or dont even try this...


2) Prep your projectors you will need to grind off these areas to make sure they fit into the Fog Lights



3) Heat gun or Oven Method your Foglight Lens Off.. 300 degrees for 10min is fine. Take your time nice and slow with a screwdriver to pry em off.


4) Unscrew the old mounting brackets for the halogen bulb



5) We are going to dremel off this interior circle in the Foglight here..



TAKE YOUR TIME HERE AND GO SLOW AND TEST FIT AGAIN.. When you do it right.. the Projector should fit like this..



OPTIONAL: I blacked house my headlights..


6) Reassemble and silcon areas that you need to hide marks to make it securly.. your end results should look like this..




OPTIONAL: Here you have 2 choices... Risk the look with rock chips on the freeway.. or put the stock lens back on to cover your projector...

Cutoff: (The extra light you see on top in the middle is from my TSX not the Fogs... The Fogs overpower my TSX.)






One FOG On..

turbodremz

iTrader: (18)

You will not be disappointed. Those are actually the same exact ones I retrofitted into my 92 turning lamps, only difference is mine have the multi-colored lens. The light output and cutoff line is excellent!

97-SC300

iTrader: (17)

Should look sweet when you finish.

GZZ-TT

iTrader: (5)

Did you find trim edge rubber strips?

meangreen1

iTrader: (13)

Nice. In for the finished pics

MidloSC

iTrader: (1)

You're doing a step by step for us, correct?

eliteskill

iTrader: (8)

Im taking pictures of everything.. When its done ill post a step by step

eliteskill

iTrader: (8)

I still need to find some.. But I will.. or order online

TEST FIT.. Finished mounting the projector on one of em

abounly

iTrader: (27)

Can i come over and watch?

nlc

this retro fit looks really nice

i would assume it looks different in a 92+ bumper..so can you post a pic?

eliteskill

iTrader: (8)

Pictures are up of 1 finished projector 99%... + a DIY in progress





I need to align them still

soarinhigh

iTrader: (2)

I love the look of these. Might have to do this myself.

TougeSC3

iTrader: (2)

Thanks for the DIY brother. We need to start posting more of these up. Still waiting for pics of the cutoff.

jadu

iTrader: (42)

looks good i gotta see the nights shots

uras300

iTrader: (2)

I was contemplating on using the blazer or R1 projectors. Please do share a cut off photo once eveything is buttoned up. Great progress so far.