my sc400 1jz swap finally
#61
1JZ Single SC400
iTrader: (59)
Join Date: Jan 2009
Location: Alabama, Roll Tide!
Posts: 8,518
Likes: 0
Received 15 Likes
on
12 Posts
powering the ignition was easy i hacked a plug off the 1uzfe. under the fuse box you will find two plugs. one plug is on your harness and the other is the wrong plug. you will be cutting the the right plug off the 1uzfe and will be using that. the plug from the 1uzfe has three wire's red orange and black and the black. the wrong plug only has two wires black and orange and black. all you need to do is soider the red and black wire and orange and black wire on the 1uzfe plug to the orange and black wire on the 1jz harness and black to black and plug it in. mine started first try
Just kidding, good job on figuring this portion out. I chose another route, but in the end, they both worked.
Thread
Thread Starter
Forum
Replies
Last Post