6SOARER

iTrader: (20)

Im having problems getting the T fitting on the oil sending unit to the turbos feed line. Is there any other place I can T off to use for my feed line on the GE block?

imDementeD

iTrader: (7)

..most people use a is300 union bolt and run their feed from there.
for more info google it and you'll come back with a lot of results(i dont have any more info or id offer it so im not tryin to yell for you to search but just suggesting it to get the info you need)

6SOARER

iTrader: (20)

Cool, that is what I was looking for. Thanks

99SC42

iTrader: (44)

Don't run it from the big bolt that hold the oil filter housing in place, because the oil you picking up from there is not filter yet.
I ran mine from the oil pressure swith and moved the oil pressure switch at that bolt on the oil filter housing.

turbodremz

iTrader: (18)

Dont ruin your union bolt, or waste time using the IS union bolt and blah blah blah...


Get one of these, install it in 5 minutes, and call it a day:

http://www.glowshiftdirect.com/Oil-F...-Adapters.aspx


I had one on my na-t, had ZERO issues. Very worth the price for something very simple to use and install, and gives 2 extra ports for oil temp and pressure gauges..

06bluerex

good info turbodreamz

megamax

iTrader: (9)

bump, any other solutions?