pur4orm

Added the polished pipes ( now she has guts ). Also, fitting wheels today 20 x 9 and 20x12. Duraflex AB-F BODY KIT arrives thurs. Had to order a new harness, the old one is dry rotted.

Penthos

iTrader: (1)

Been having the Trans rebuilt and oil cooler installed for the past week. I pick her up tomorrow!

CalitriSC

iTrader: (13)

Megan rear camber arms

net4n6

iTrader: (1)

I fixed the clicking sound under the car after the engine has been turned off. It caused by the exhaust/catalyst converter heat insulator. Total cost $2.50 for two ring clamps from Home Depot.

BlackIRON

Put in a nice header, but wondering how to fix my burning rich problem without a catalytic lol

LEXXIUM

iTrader: (1)

Just finished installing a supra front sway bar without taking the wheels off
and then took it for a ride ...

t2d2

iTrader: (8)

First post to this thread... I didn't do anything to my SC today, but I did a lot for it, placing my first Sewell order. (I feel fully initiated now!) Transmission mount, air filter, ignition ring (90% off!), center console screw cover, 4x window trim clips, 4x door screw grommets, 4x door panel screws, 2x headlight nuts, battery terminal cover, 4x misc. bulbs, 2x A/T shifter bushings (for rattling), and 6x engine splash shield screws, all for $135 shipped. In addition to a few needed things, that will give me lots of small projects down the road to fill in a few gaps as I go back over those areas. It's amazing how many little fasteners and caps get lost over the years.

OG Dada

iTrader: (10)

You getting rid of negative camber or adding more camber?

myLEXsc400

I bought my silver SC400 a silver companion, 99 GS400
Just got it, and right away had to get rid of the ugly 16" wheels for some 18" G35's

BeaksSC

iTrader: (1)

Fixed my misfire type issue by replacing the ignition coil connector, but it was leaking oil today. Probably because it was on stands for a week and we already had a slight leak so it probably puddled up at the leak and then decided to all come out when we had the car running for a bit. So today we replaced the valve cover gaskets and since the're off, we're painting them silver right now. Looks good so far. Hopefully this fixes the oil leak issue... I'll post some pics if I remember when they're finished.

GISguy

Ordered Tein HAs!

Sweatshop

iTrader: (11)

Bought her a proper spare tire, Supra TT OEM. Despite what is heard (and whet I believed to be true) G35 spares DO NOT CLEAR TT BRAKES!!!!! You've been warned.

jadu

iTrader: (42)

been busy with some repairs. 2x cam seals, front main seal, timing belt, timing belt idler. A newer crank pulley and lower timing belt cover will also go on. I believe I had the original cam seals and front main seal. I exhausted 2 cans of engine degreaser before putting on the new parts tried my best to clean everything before putting it back on and I'm actually enjoying it and taking my time with this. . You can see how much oil I was losing and the grime that accumulated on the left and right sides.

brucelee1

iTrader: (2)

That is a great shot of the engine. thanks!

Kira X

iTrader: (24)

I put air in the tires this morning. I might wash it after work.