2JZGE Na-T TT Ecu Mod
#798
Lead Lap
iTrader: (1)
This surging is driving me batty!
I discovered that having the TPS improperly adjusted screws up timing though. If you have it wrong, it makes the jumper of the DLC have no effect.
I can't get the TPS to adjust properly. If I have it set at the .65 volts off the yellow wire, (both at the ECU and at the TPS) then it's not right because the timing goes waaaay advanced and the jumper has no effect. I tried the method backing it off with the jumper in until the timing drops back down, but it still surges. I tried adjusting using the feeler gauge, but it still surges.
I just realized as I was typing this that I need to find that capacitor and make the OBD cable thing and maybe I can see what's going on.
I got fed up and cleaned up and painted my center console trim pieces.
Before:
After:
I discovered that having the TPS improperly adjusted screws up timing though. If you have it wrong, it makes the jumper of the DLC have no effect.
I can't get the TPS to adjust properly. If I have it set at the .65 volts off the yellow wire, (both at the ECU and at the TPS) then it's not right because the timing goes waaaay advanced and the jumper has no effect. I tried the method backing it off with the jumper in until the timing drops back down, but it still surges. I tried adjusting using the feeler gauge, but it still surges.
I just realized as I was typing this that I need to find that capacitor and make the OBD cable thing and maybe I can see what's going on.
I got fed up and cleaned up and painted my center console trim pieces.
Before:
After:
#799
yeah the tps can mess up a number of things. I just keep moving it until it is happy, never needed any feelers or a fluke for it.
I slide on the tps on where its aligned up with the screw holes and the edges of the tps on the bacskide are in contact with the metal parts that turn it, but I make sure the tps is not turned at all when sliding it on. Once its resting on it I turn the tps a hair over until I can feel the pressure of the tps being turned. As soon as I feel that I tighten it down, and make small adjustments from there.
from there I am usually pretty close, a couple blips of the throttle will tell you if its decelerating properly.
I slide on the tps on where its aligned up with the screw holes and the edges of the tps on the bacskide are in contact with the metal parts that turn it, but I make sure the tps is not turned at all when sliding it on. Once its resting on it I turn the tps a hair over until I can feel the pressure of the tps being turned. As soon as I feel that I tighten it down, and make small adjustments from there.
from there I am usually pretty close, a couple blips of the throttle will tell you if its decelerating properly.
#801
Lead Lap
iTrader: (1)
FINALLY FIXED THAT F***ING SURGING!
After all that work and testing and tweaking and checking, it turns out I have a bad coil or igniter. I went back to my Ford coil setup and ES300 igniter and it runs beautiful. It runs sooooo smooth now. I can't even feel the engine running. The electric fans vibrate more than the engine. FINALLY!!!!
Never did get the OBDI cable to work.
Now I have to fix the truck, my laptop, the latest 2 wheeled addition, and I have been informed that the dryer broke yesterday.
After all that work and testing and tweaking and checking, it turns out I have a bad coil or igniter. I went back to my Ford coil setup and ES300 igniter and it runs beautiful. It runs sooooo smooth now. I can't even feel the engine running. The electric fans vibrate more than the engine. FINALLY!!!!
Never did get the OBDI cable to work.
Now I have to fix the truck, my laptop, the latest 2 wheeled addition, and I have been informed that the dryer broke yesterday.
#806
Driver School Candidate
Join Date: Dec 2012
Location: ca
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Hello Club... Noobie here
I have read thru all the pages of this thread---And nice work ! :-) I am still a lil confused on what ECU I should use for my car, And If will even have any benefits at at all...?...
I have a 1996 OB2 Automatic Supra W a 2JZ GE- I have A Custom turbo From a shop in San Bern CA using the crappy XS mani, Thicker HG, ARP studs, 225walbro, Wideband O2, Electric Dual Fans W Derale controller, 10 PSI spring...
I am having issues cuurrently as sometime the car runs great and smooth-Then half the time it runs like crap misfiring all over the place.. throws a CEL saying Random multiple misfire-- But the widebank shows optimal -WTF.?. is this because it is trying to adjust itself? I have also tried removing the boost pipe from throttle body and running an intake filter thru the MAF and still runs like crap with no boost at all... THIS BLOWS!!
I Do Have a new VAFC2 and RC 440's I could use- Id rather sell the VAFC and maybe use this mod to fix the ECU so I can actually run a Turbz and also use the RC 440's...
So do I just need the TT JDM ECU and use the 440's .?.
Or do I have to use the TT USDM ECU and find 550's .?.
From reading the thread- It states that I have to keep the MAF since I have the auto trans.?. Is this correct?
Please help- :-)
I have read thru all the pages of this thread---And nice work ! :-) I am still a lil confused on what ECU I should use for my car, And If will even have any benefits at at all...?...
I have a 1996 OB2 Automatic Supra W a 2JZ GE- I have A Custom turbo From a shop in San Bern CA using the crappy XS mani, Thicker HG, ARP studs, 225walbro, Wideband O2, Electric Dual Fans W Derale controller, 10 PSI spring...
I am having issues cuurrently as sometime the car runs great and smooth-Then half the time it runs like crap misfiring all over the place.. throws a CEL saying Random multiple misfire-- But the widebank shows optimal -WTF.?. is this because it is trying to adjust itself? I have also tried removing the boost pipe from throttle body and running an intake filter thru the MAF and still runs like crap with no boost at all... THIS BLOWS!!
I Do Have a new VAFC2 and RC 440's I could use- Id rather sell the VAFC and maybe use this mod to fix the ECU so I can actually run a Turbz and also use the RC 440's...
So do I just need the TT JDM ECU and use the 440's .?.
Or do I have to use the TT USDM ECU and find 550's .?.
From reading the thread- It states that I have to keep the MAF since I have the auto trans.?. Is this correct?
Please help- :-)
#808
Lexus Test Driver
iTrader: (44)
Join Date: Jan 2007
Location: Maryland /Germantown
Posts: 5,139
Likes: 0
Received 7 Likes
on
7 Posts
Hello Club... Noobie here
I have read thru all the pages of this thread---And nice work ! :-) I am still a lil confused on what ECU I should use for my car, And If will even have any benefits at at all...?...
I have a 1996 OB2 Automatic Supra W a 2JZ GE- I have A Custom turbo From a shop in San Bern CA using the crappy XS mani, Thicker HG, ARP studs, 225walbro, Wideband O2, Electric Dual Fans W Derale controller, 10 PSI spring...
I am having issues cuurrently as sometime the car runs great and smooth-Then half the time it runs like crap misfiring all over the place.. throws a CEL saying Random multiple misfire-- But the widebank shows optimal -WTF.?. is this because it is trying to adjust itself? I have also tried removing the boost pipe from throttle body and running an intake filter thru the MAF and still runs like crap with no boost at all... THIS BLOWS!!
I Do Have a new VAFC2 and RC 440's I could use- Id rather sell the VAFC and maybe use this mod to fix the ECU so I can actually run a Turbz and also use the RC 440's...
So do I just need the TT JDM ECU and use the 440's .?.
Or do I have to use the TT USDM ECU and find 550's .?.
From reading the thread- It states that I have to keep the MAF since I have the auto trans.?. Is this correct?
Please help- :-)
I have read thru all the pages of this thread---And nice work ! :-) I am still a lil confused on what ECU I should use for my car, And If will even have any benefits at at all...?...
I have a 1996 OB2 Automatic Supra W a 2JZ GE- I have A Custom turbo From a shop in San Bern CA using the crappy XS mani, Thicker HG, ARP studs, 225walbro, Wideband O2, Electric Dual Fans W Derale controller, 10 PSI spring...
I am having issues cuurrently as sometime the car runs great and smooth-Then half the time it runs like crap misfiring all over the place.. throws a CEL saying Random multiple misfire-- But the widebank shows optimal -WTF.?. is this because it is trying to adjust itself? I have also tried removing the boost pipe from throttle body and running an intake filter thru the MAF and still runs like crap with no boost at all... THIS BLOWS!!
I Do Have a new VAFC2 and RC 440's I could use- Id rather sell the VAFC and maybe use this mod to fix the ECU so I can actually run a Turbz and also use the RC 440's...
So do I just need the TT JDM ECU and use the 440's .?.
Or do I have to use the TT USDM ECU and find 550's .?.
From reading the thread- It states that I have to keep the MAF since I have the auto trans.?. Is this correct?
Please help- :-)
Last edited by 99SC42; 12-20-12 at 06:00 AM.