WestsideSC

check kick panel fuse and it was ok. I cant get the side view mirrors to move when i press the adjustment ****.

any ideas?

92 sc400.

AristoPra

iTrader: (10)

i have the same problem and have checked all the fuses/all okay. even removed the mirror to see if it was disconnected (dropped a bolt in the panel now i have to remove it and look for the bolt, which i'll be doing over the weekend ). i have a 92 sc300 tho. . .

any help would be greatly appreciated specially while i'll be removing the panel this weekend.

RolxuSC400

Sorry to sound like Captain Obvious here but did you check the actual switch itself make sure its good?

aliga

iTrader: (147)

you guys need the mirror ecu.

i have them 40 shipped

over40driv

I got an ECU from Algia and it fixed my sidemirrors.

acenase

My side mirrors also can't move from the switch. What does this Mirror ECU do? It just plugs in under your hood? What causes the side mirrors (both side) to malfunction in the first place?

over40driv

The mirror ECU is under the drivers side under dash, has 1 tricky bolt to get to, but is the controller for the mirrors after the switch.

dwebb99

iTrader: (17)

you need a mirror ecu,it's a diy job

Yrjan

ECU for mirrors? so, neither drivers or passanger side mirrors on my GS300 will move up or down? They go side to side fine. Should I replace the ECU? is there on for each mirror?

Woody426

Anybody have a pic of this elusive item ? I have an SC available that I scavenge parts of off, I would like to see a pic to know what Im looking for