tuninghaus

iTrader: (2)

any one know where the door lock actuator/s are for the SC300/400?

my driver side door doesn't lock with the power locks (have to do it manually with my hand). i pulled the door panels off and inspected the locks and cable which looked fine.

any cure or fix to this problem? the passenger works perfectly fine.

thanks

RalAegidius

I have factory service manuals for my SC300 so I will check when I get home.

Mr.Phreak

They're part of the locking mech

tuninghaus

iTrader: (2)

part of the locking mechanism, meaning it's in the door somewhere? or? do you know exactly where it is?

Mr.Phreak

Just trace the wires, and you'll find it.

tuninghaus

iTrader: (2)

****! that looks like a pain in the *** to replace/ or pretty pricey...

RGW LLC

iTrader: (50)

it's very easy to change....i mean if you have done it before....or take it to a shop and let them do...if you need that aculator part, we have it in stock...please PM us for details..thanks

TonyN

iTrader: (1)

Bump.

I need the passenger side door lock/actuator assembly.

asquires

so neither of my sc400 outside door handles work, i already know its because that metal rod broke but i was wondering if there is any quick fixes or do i have to get another actuator?

oldManTan

my passenger side lock doesn't lock all the way. when i press the lock button the lock switch moves a little but not all the way. what exactly is the problem there? it locks fine manually just not with the button.

TonyN

iTrader: (1)

your screwed, get a another actuator

try looking at the clip on the door handle and make sure it has enough tention, it might also be that your actuator might be slowing going out.

SEIDO

iTrader: (1)

Trust me it's a PITA to change.

DON'T BELIEVE THAT ILLUSTRATION ABOVE!!!
IT'S MISSING INFORMATION. HERE'S "WHY" …

I did it on my passenger side, and now I have to do it on my driver side.
The window-track is in the way of the unit; so getting it in there (or taking the old one out), and onto the door, is the hard part; 'cus it's too big to fit around the track. So you have to fight that whole actuator unit into place, around a few inches of space only, WITHOUT bending the window-track.
It doesn't take long (IF you've done it before …) but you'll get pissed-off the first time. It's not a fun job.

Kris9884

iTrader: (7)

Well I am doing this as we speak and am at a stand still, I have everything unhooked and its ready to come out but it wont budge out from behind the track on either side, only slides up and down... Are there any tricks to getting this out besides removing the window and track??

Kris9884

iTrader: (7)

Wow, so far, that was the worst experience I've had with my car.. The hardest part was getting the far screw back into the handle while trying to get around the window track. I feel like I gave myself carpel tunnel just after tonight.

BUT, that being said, finally, my girlfriend can open her own door haha

oldManTan

where can i get the actuator part? my locks just budge a little when i press the button. they never lock or unlock fully. can you fix the old actuator or is the only way to fix it is get a new one.