Tore apart my 97 tail lights today.. modified them a bit- pics inside :)
#46
Lead Lap
Thread Starter
iTrader: (4)
Join Date: Dec 2005
Location: CA
Posts: 755
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rodvtan
I need to replace the bulb for my left brake light. How do I remove the tail light ? Thanks.
Hey, at least he searched, right?
Update- there were a few strong rainy days here, and everything seems to be sealed fine. So far, so good- the lights look great.
By the way, 3 pairs of LED's arrived already, I'm just waiting on the 2 smaller pairs. Once those arrive, I'll install all 5 pairs of LED bulbs, and pics will come shortly.
-Allen
#47
Driver School Candidate
Join Date: May 2003
Location: Delaware
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
I've already figured it out but thanks anyway. I did search and I didn't find any specific info. What I don't understand is the hesitation I sensed from Iron Cobra. A one-line info just like what you wrote would have been sufficient.
#49
Lead Lap
Thread Starter
iTrader: (4)
Join Date: Dec 2005
Location: CA
Posts: 755
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rodvtan
I've already figured it out but thanks anyway. I did search and I didn't find any specific info. What I don't understand is the hesitation I sensed from Iron Cobra. A one-line info just like what you wrote would have been sufficient.
posterboi- thanks for the compliment
-Allen
#50
nice, i have my lights apart at the moment, and im doing an LED panel conversion instead of bulbs.
if your dropping in LED bulbs right into the socket, your going to need load resistors. your turn signals will blink fast and your brake lamp indicator will come on.
if your dropping in LED bulbs right into the socket, your going to need load resistors. your turn signals will blink fast and your brake lamp indicator will come on.
#51
Lead Lap
Thread Starter
iTrader: (4)
Join Date: Dec 2005
Location: CA
Posts: 755
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jtucci
nice, i have my lights apart at the moment, and im doing an LED panel conversion instead of bulbs.
if your dropping in LED bulbs right into the socket, your going to need load resistors. your turn signals will blink fast and your brake lamp indicator will come on.
if your dropping in LED bulbs right into the socket, your going to need load resistors. your turn signals will blink fast and your brake lamp indicator will come on.
-Allen
#52
Pole Position
Nice flat steel surface on the rear of the trunk under the lights. Firmly attach them to maximize heat transfer to the body and to keep them away from the inner trunk lining.
I'd recommend these for the turn signals only as the duty cycles are much less than brake light usage, especially for autos. That translates to much less heat you're pumping into the trunk.
LED conversions on the brake lights only require you to toss the little "light out" indicator in the cluster. Easy as pie.
I'd recommend these for the turn signals only as the duty cycles are much less than brake light usage, especially for autos. That translates to much less heat you're pumping into the trunk.
LED conversions on the brake lights only require you to toss the little "light out" indicator in the cluster. Easy as pie.
#53
Driver School Candidate
Join Date: Oct 2005
Location: Missouri
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Lens Painter
If you want to find the Paint to color the Red and Smoke the backup light go to K2motor.com on the left side of page look under Accessories and click on LENS Painter..hope this helps guys..good luck
#54
Driver School Candidate
Join Date: Oct 2005
Location: Missouri
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
You can also get Testors # 1605 Transparent Candy Apple Red spray paint from your local Hobby Store or Tower Hobbies..I think they also have a Transparent Smoke color too..but not sure about that one. Good Luck
#56
That's funny... I've been planning the EXACT same mod since I bought my car almost a year ago, and I've always wondered why nobody else did it. Props to you... looks great, and makes me positive that's what I want to do to mine now
#57
Yep, that was me. About a year ago I did the all-red mod as the orange sucks, and went full LED conversion as well. I never bothered with the reverse lights as they never really bothered me but yours look damn hot. Nice touch on that one.
FINALLY some more inventors on the board.
Keep 'em coming, great work!
FINALLY some more inventors on the board.
Keep 'em coming, great work!
#58
the best taillight work done. i am curious about how you made the orange part red, is there a specific spray, or plastic sticker to put over it? and how did you take it apart, and manage to put it together again without it falling apart on you? never done this before. so very curious ^^
#59
Pole Position
It's big and high.
Orange part was tinted red with red tint spray. Light was taken apart using the shake 'n bake method. Just heat and pull apart. It's a painstaking process and you have to approach it like a surgeon or you WILL be buying yourself a new light.
the best taillight work done. i am curious about how you made the orange part red, is there a specific spray, or plastic sticker to put over it? and how did you take it apart, and manage to put it together again without it falling apart on you? never done this before. so very curious ^^