SC300/400 Aero parts fitment feedback thread
02-13-07, 01:25 AM
#64
Lead Lap
Join Date: Mar 2005
Location: Ca
Posts: 755
Likes: 0
Received 0 Likes
on
0 Posts
I dont have one myself. But Ive seen a few of them in person. And i looked pretty closely at all of them. All had perfect fitment....
BUT FYI they all had a similar crack in close to the same spot on the front bumper also.
If your considering the one i think you are. Its a steal for an authentic kit IMO. I would be all over it if i were in the market for a bodykit.
Just be sure youre willing and able to be extreeemely careful in parking lots ,driveways, etc. And still be ready to deal with the probability of having to fix cracks and chips pretty routinely.
(Make sure you either have or plan on getting good coilovers too)
BUT FYI they all had a similar crack in close to the same spot on the front bumper also.
If your considering the one i think you are. Its a steal for an authentic kit IMO. I would be all over it if i were in the market for a bodykit.
Just be sure youre willing and able to be extreeemely careful in parking lots ,driveways, etc. And still be ready to deal with the probability of having to fix cracks and chips pretty routinely.
(Make sure you either have or plan on getting good coilovers too)
02-19-07, 06:34 PM
#66
Lexus Champion
iTrader: (1)
Join Date: Oct 2005
Location: Iowa/WI
Posts: 3,574
Likes: 0
Received 0 Likes
on
0 Posts
Im thinking about ordering eather the Exclusive Primary front lip for my 92 sc300 or the WISE SPORTS midMC front lip- does anyone have any experiance with these two? both can be seen here http://www.memoryfab.com/products/aero/car59 thanks
Last edited by iasc300; 02-19-07 at 06:38 PM.
02-22-07, 08:26 PM
#68
Registered User
Join Date: Jan 2007
Location: VA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
--------------------------------------------------------------------------------
Car Year - 95
Part type - full kit
Part make - Origin
Part construction - Fiberglass
Source - intensepower.com
Price - 807.50
Fitment -Good
Installation - Mid to High
Durability - Light and great
Notes - all panels required sanding and drilling. the size was almost perfect for the front and back but the side skirts were a B****. almost cracked it by accident or agression, don't really know. it looks really good though. the finish on them is good. very smooth with little prepping needed. hardest part is drilling the holes. side skirts were a B****.
Car Year - 95
Part type - full kit
Part make - Origin
Part construction - Fiberglass
Source - intensepower.com
Price - 807.50
Fitment -Good
Installation - Mid to High
Durability - Light and great
Notes - all panels required sanding and drilling. the size was almost perfect for the front and back but the side skirts were a B****. almost cracked it by accident or agression, don't really know. it looks really good though. the finish on them is good. very smooth with little prepping needed. hardest part is drilling the holes. side skirts were a B****.
03-07-07, 11:12 AM
#69
Rookie
Join Date: Dec 2005
Location: california
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Car Year - 1993
Part type - front bumper fenders on the way soon
Part make - yanack
Part construction - frp
Source - roo from fetch
Price -more than i wanted to spend
Fitment - perfect fit does need widebody fenders though
Durability - very tough construction several times I hit so had I thought it was going to shatter, only paint scratched
Notes - it is sexxxay
Part type - front bumper fenders on the way soon
Part make - yanack
Part construction - frp
Source - roo from fetch
Price -more than i wanted to spend
Fitment - perfect fit does need widebody fenders though
Durability - very tough construction several times I hit so had I thought it was going to shatter, only paint scratched
Notes - it is sexxxay
03-18-07, 03:13 PM
#70
Driver School Candidate
Join Date: Feb 2007
Location: BC
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
I just bought a Vertex kit from Japan and I have a 91 2.5TT am I going to have a problem with the fog lights not fitting or will i have to go and buy 97+ fog lights
03-27-07, 11:33 PM
#72
Driver
Join Date: Sep 2006
Location: Wisconsin
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
Car Year - 95 SC300
Part type - Full bodykit(frnt,sides,rear,frnt fenders
Part make - Car Make T&E Vertex
Part construction - FRP
Source - Vertex-usa.com/speedaliance.com
Price - $2730+shipping
Fitment - Practically OEM, nothing special had to be done, used stock mounts
Installation - Myself, easy as hell
Durability - PERFECT, ecspecialy for drifting
Part type - Full bodykit(frnt,sides,rear,frnt fenders
Part make - Car Make T&E Vertex
Part construction - FRP
Source - Vertex-usa.com/speedaliance.com
Price - $2730+shipping
Fitment - Practically OEM, nothing special had to be done, used stock mounts
Installation - Myself, easy as hell
Durability - PERFECT, ecspecialy for drifting
05-09-07, 08:52 AM
#75
Rookie
Join Date: Apr 2006
Location: Texas
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
i dont know the name of this bumper, but it fits good on my 96. slight gap on pass side between bumper and fender where it bolts on. could probably be fixed, but i want to go with a oem 97+ bumper. this one is fiber glass and bumped a curb and messed up the bottom lip part as seen in pic. shop quoted 150 bucks to fix. i would gladly sell this bumper if anyone wants it.
