Rsp sc400
02-01-14, 01:18 PM
#35
03-02-14, 08:38 AM
#41
Driver School Candidate
Thread Starter
Join Date: Apr 2005
Location: Louisville, KY
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
No, but I need to. At times they rub a little. Any lower and it would be a must.
These are Varrstoen ES7s, not XXR 531s
The lip was very easy to install. Its just rubber with double sided tape. Peel and place.
These are Varrstoen ES7s, not XXR 531s
The lip was very easy to install. Its just rubber with double sided tape. Peel and place.
03-02-14, 08:53 AM
#42
I cringe at the thought of rolling my fenders after seeing some of these terrible jobs people have done to their SC's on here. All uneven with chipped paint. And my car isint anywhere as clean or rare as yours. I would hate to see that on this car.
Am I the only one whose trying to stay away from rolling/pulling/shaving at all costs?
Am I the only one whose trying to stay away from rolling/pulling/shaving at all costs?
03-02-14, 09:00 AM
#43
Pole Position
Join Date: Feb 2014
Location: LA
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
I cringe at the thought of rolling my fenders after seeing some of these terrible jobs people have done to their SC's on here. All uneven with chipped paint. And my car isint anywhere as clean or rare as yours. I would hate to see that on this car. Am I the only one whose trying to stay away from rolling/pulling/shaving at all costs?
03-02-14, 04:07 PM
#44
Driver School Candidate
Join Date: Dec 2012
Location: Ca
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
yeap I used a roller and it left bumps where the tabs are so be careful but im in process of getting some new paint so it does not matter, my buddy/painter got better results with a hammer and dolly and got a slight pull aswell to avoid any rubbing
