SC Bolt-on Fender Flares!
02-17-13, 08:38 PM
#47
Pole Position
iTrader: (2)
Join Date: Nov 2012
Location: NorCal
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
If anybody wants more info on it,
He's running 245/35/19 on the front
and 275/30/19 on the back
Prodrive Rims: 19x9.5 +15 J
It also says +50mm spacers in the front and +60mm spacer in the back.
02-17-13, 09:32 PM
#48
Lexus Test Driver
Join Date: Aug 2011
Location: NM
Posts: 1,024
Likes: 0
Received 0 Likes
on
0 Posts
this is funny...city night posts a drawing of fender holes and everyone screams "its a lexus blahblah." How are these horrid looking fender flares okay? Am I the only one who noticed the rivets? sxreams cheap to me.
But to the op, my advice stays the same...if you like the flares, then get them. Its your car.
But to the op, my advice stays the same...if you like the flares, then get them. Its your car.
02-17-13, 11:56 PM
#49
There's an article on this car on page 36. March, 2011 issue of Drift Tengoku
If anybody wants more info on it,
He's running 245/35/19 on the front
and 275/30/19 on the back
Prodrive Rims: 19x9.5 +15 J
It also says +50mm spacers in the front and +60mm spacer in the back.
If anybody wants more info on it,
He's running 245/35/19 on the front
and 275/30/19 on the back
Prodrive Rims: 19x9.5 +15 J
It also says +50mm spacers in the front and +60mm spacer in the back.
02-18-13, 12:23 PM
#51
Driver
Join Date: Oct 2009
Location: killa cali
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Calitrisc: I agree with u but that red car is a drift car. they are most likely running that huge spacer in the front for clearance issues at full lock, so I has it's reason to be there. iirc, that was Daigo's old street car
02-19-13, 05:45 AM
#54
Pole Position
Join Date: Dec 2012
Location: Delaware
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
thought I would add info since I know these flares well. those ones are ZG flares. The ZG flares pretty much fit every car out there and they are easy to distinguish by the shape. I had installed them on my RX7 and they can be found at Ronin, but you have to E-mail ronin to get them made for about $200 I think. here is their site, http://www.roninspeedworks.com/ like I said send them a private message or email to get them made for you. they can do without the rivet pits or with them
here is a pic of my old car with them on it. It had a LS1/T56 before I totalled her
here is a pic of my old car with them on it. It had a LS1/T56 before I totalled her
02-19-13, 11:19 AM
#57
I posted pics of the custom flares we did on my soarer, back like 6-8 years ago. I lost intrest in the project and its buried in the barn with all the other old projects.
Jimmy
Jimmy
02-19-13, 11:38 AM
#58
Lead Lap
iTrader: (1)
Join Date: Feb 2008
Location: I.E Southern California to SA,Texas
Posts: 4,447
Likes: 0
Received 5 Likes
on
5 Posts
thought I would add info since I know these flares well. those ones are ZG flares. The ZG flares pretty much fit every car out there and they are easy to distinguish by the shape. I had installed them on my RX7 and they can be found at Ronin, but you have to E-mail ronin to get them made for about $200 I think. here is their site, http://www.roninspeedworks.com/ like I said send them a private message or email to get them made for you. they can do without the rivet pits or with them
here is a pic of my old car with them on it. It had a LS1/T56 before I totalled her
here is a pic of my old car with them on it. It had a LS1/T56 before I totalled her
02-19-13, 12:52 PM
#60
Lexus Test Driver
iTrader: (6)
Join Date: May 2010
Location: Colorado Springs, CO
Posts: 1,442
Likes: 0
Received 4 Likes
on
4 Posts
bings has some nice looking fender flares. also there is a SC on the sites pictures. with big ole meaty 18x13 meisters in the rear.
http://www.bings.ca/index.php?page=s...rent=2&child=8
http://www.bings.ca/index.php?page=s...rent=2&child=8