SC- 1st Gen (1992-2000)

Removal trunk spoiler 1992 sc300 dealer install

Thread Tools
 
Search this Thread
 
Old 10-12-12, 12:44 PM
  #1  
johnmilina
Driver School Candidate
Thread Starter
 
johnmilina's Avatar
 
Join Date: Aug 2012
Location: ca
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Question Removal trunk spoiler 1992 sc300 dealer install

I'm having problems removing spoiler. The led lights are out and i got new lights. I have to run the wire through the spoiler then into the trunk. I removed two bolts from inside the trunk to remove the spoiler then i ran fishing line between the trunk lid and the spoiler. Is there anything else holding the spoiler?
Old 10-12-12, 03:43 PM
  #2  
daily400
Pole Position
 
daily400's Avatar
 
Join Date: Mar 2012
Location: il
Posts: 281
Likes: 0
Received 0 Likes on 0 Posts
Default

yes ur missing like 3 more bolts i think theres a total of 5 or 6
Old 10-13-12, 07:54 AM
  #3  
johnmilina
Driver School Candidate
Thread Starter
 
johnmilina's Avatar
 
Join Date: Aug 2012
Location: ca
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

I'm looking underneath the trunk inside the car and i don't see any more bolts. Any help would be appreciated.
Old 10-13-12, 10:52 AM
  #4  
Zinik
Rookie
iTrader: (1)
 
Zinik's Avatar
 
Join Date: Sep 2012
Location: VC
Posts: 53
Likes: 0
Received 0 Likes on 0 Posts
Default

isnt there 2 for each side at least? maybe more
Old 10-13-12, 06:49 PM
  #5  
MKIVS374
Lead Lap
iTrader: (2)
 
MKIVS374's Avatar
 
Join Date: May 2010
Location: Pa
Posts: 732
Likes: 0
Received 0 Likes on 0 Posts
Default

Yeah there are more look in my thread and you can see where the holes were I welded mine.
Old 10-15-12, 09:55 AM
  #6  
daily400
Pole Position
 
daily400's Avatar
 
Join Date: Mar 2012
Location: il
Posts: 281
Likes: 0
Received 0 Likes on 0 Posts
Default

They might not b visible I just took mine off there's little holes for them
Old 10-15-12, 10:55 AM
  #7  
johnmilina
Driver School Candidate
Thread Starter
 
johnmilina's Avatar
 
Join Date: Aug 2012
Location: ca
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

daily400 do you have pic's
Old 10-24-12, 08:18 AM
  #8  
johnmilina
Driver School Candidate
Thread Starter
 
johnmilina's Avatar
 
Join Date: Aug 2012
Location: ca
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default new led lights in spoiler without taking spoiler off

SINCE I COULD NOT TAKE THE SPOILER OFF (DEALER INSTALL) I DRILLED A HOLE IN THE TRUNK THEN INTO THE SPOILER, BEING VERY CAREFUL NOT TO MAKE THE WIRE SHOW. I NEXT RAN A FISH LINE INTO THE TRUNK HOLE INTO THE SPOILER AND PULLED THE FISH LINE THROUGH THE SPOILER. I TIED THE WIRE FROM THE SPOILER LED LIGHT AND PULLED IT THROUGH THE SPOILER AND TRUNK LID. THEN I RAN THE WIRE INTO THE CAR AND TIED THE WIRE TO THE BACK BRAKE LIGHT. NOW THE LED LIGHTS WORK
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Ken167
IS - 2nd Gen (2006-2013)
18
11-26-16 07:08 AM
andy350
IS - 1st Gen (2001-2005)
5
07-11-16 07:55 PM
LexusIRL
GS - 3rd Gen (2006-2011)
2
01-20-11 10:52 PM
LEXBOGGY
SC- 1st Gen (1992-2000)
6
07-01-03 09:47 PM
gebo
GS - 2nd Gen (1998-2005)
10
08-26-02 06:08 PM



Quick Reply: Removal trunk spoiler 1992 sc300 dealer install



All times are GMT -7. The time now is 05:11 AM.