ncphillypr

New to this forum crap, & just bought a 92 sc400 from a auction with 116,& sum change (miles) need sum advise my flashers work but turn sigs don't. You guys my have went over this before but i couldn't find anything.

ncphillypr

new but 2nd thread think i put the first one in the wrong section. Anyway whats up guys just bought a 92 sc400 from auction in decent shape need some advise the turn signals are not working but the flashers (hazards) are any answers?

p.s. i changed most of the bulbs & the all flasher relays

UR2klose

iTrader: (3)

try replacing the relay for the turn singals.. its should be in the fuse box under the hood..

ncphillypr

thanks for looking but i forgot to mention that i replaced that already

OG Dada

iTrader: (10)

Check if the wiring are cut.

chingpo05

iTrader: (2)

do your hazards work? if not then it may be the flasher. i would check fuses, hazards (since they run on one circuit), then go from tracing signal pwr from the signal switch on the column. there have been occurences where bulbs were defective and shorting out lights on cars also

ncphillypr

thanks dude that's my next step