Converting my corners into fogs...but how does the parts look like????
#1
Driver School Candidate
Thread Starter
Join Date: Mar 2010
Location: CA
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Converting my corners into fogs...but how does the parts look like????
I want to convert my corners to fogs. I got the30 amp fuse and inline fuse holder already. As far as the t-taps, pin amp automotive relay and connectors, i'm not sure of which ones to get because there are different types and varieties. Can someone post any pics of how they look like? I want to make sure i get the right parts. I got this info on Intellexual.Net and says i can find them at radioshack.
#2
Advanced
iTrader: (5)
the auto relay: http://www.radioshack.com/product/in...ductId=2062477
t-taps:
connectors, you could use these kind to hook it up to the relay, or just not get any connectors and solder them to the relay:
t-taps:
connectors, you could use these kind to hook it up to the relay, or just not get any connectors and solder them to the relay:
#3
Driver School Candidate
Join Date: Jan 2011
Location: ca
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
I just did mine today. All I did was cut both the wires leading from cornering light, cut both wires from side markers. then twist all colored wires together, solder, tape. Twist all white wires together, solder tape. Done.
If u don't have solder just buy some crimps. I had all the tools to do it for free
If u don't have solder just buy some crimps. I had all the tools to do it for free
#4
Driver School Candidate
Thread Starter
Join Date: Mar 2010
Location: CA
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
ahh sweet! Thanks for posting the pics. I think i'll go to kragen for the t-taps and connectors. I don't remember seeing them at radioshack after an hour of reading labels and looking
#5
Driver School Candidate
Thread Starter
Join Date: Mar 2010
Location: CA
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
So do you really need the amp fuse, inline fuse holder and relay? If its just cutting through the city/parking light wires and connecting them to the corner lights, i can easily do that. I just thought you'll need al the parts listed on Intellexual.Net for it to function correctly.
Thread
Thread Starter
Forum
Replies
Last Post