What did you do to your SC today?
#6151
Driver
Join Date: Jul 2015
Location: Lost Angeles,Ca
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Lol
encouragement YES! (wedding crashers)
#6153
Driver School Candidate
Join Date: Apr 2016
Location: ontario
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Put mine up on ramps, going to drop transmission pan, look at the filter, and ***** I am into. Took computer back out should have just done all the caps got to replace one 10uf at50v. dam lots to do..
#6154
Lexus Test Driver
iTrader: (8)
Installed my high beam retrofit and the APTech Aerocraft front bumper over the past few days.
Now I'm rocking a quad projector. I also installed Halon's Carbon Fiber cover that he made for a few of us a while back. The relay and ballasts for the high beams are in this space in front of the radiator behind the hood and I wants to cover it to protect them from any water that may find it's way to spill in this area, but I also just wanted to cover it up. A lot of stuff is ran there. I ran the 0 gauge hook up from my HO Alternator to the battery through there, along with both relays for the low and high beam retrofit, and the high beam ballasts are there as well, wanted things to look nice and tidy.
Now I'm rocking a quad projector. I also installed Halon's Carbon Fiber cover that he made for a few of us a while back. The relay and ballasts for the high beams are in this space in front of the radiator behind the hood and I wants to cover it to protect them from any water that may find it's way to spill in this area, but I also just wanted to cover it up. A lot of stuff is ran there. I ran the 0 gauge hook up from my HO Alternator to the battery through there, along with both relays for the low and high beam retrofit, and the high beam ballasts are there as well, wanted things to look nice and tidy.
#6155
Driver
Join Date: Jul 2015
Location: Lost Angeles,Ca
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Installed my high beam retrofit and the APTech Aerocraft front bumper over the past few days.
Now I'm rocking a quad projector. I also installed Halon's Carbon Fiber cover that he made for a few of us a while back. The relay and ballasts for the high beams are in this space in front of the radiator behind the hood and I wants to cover it to protect them from any water that may find it's way to spill in this area, but I also just wanted to cover it up. A lot of stuff is ran there. I ran the 0 gauge hook up from my HO Alternator to the battery through there, along with both relays for the low and high beam retrofit, and the high beam ballasts are there as well, wanted things to look nice and tidy.
Now I'm rocking a quad projector. I also installed Halon's Carbon Fiber cover that he made for a few of us a while back. The relay and ballasts for the high beams are in this space in front of the radiator behind the hood and I wants to cover it to protect them from any water that may find it's way to spill in this area, but I also just wanted to cover it up. A lot of stuff is ran there. I ran the 0 gauge hook up from my HO Alternator to the battery through there, along with both relays for the low and high beam retrofit, and the high beam ballasts are there as well, wanted things to look nice and tidy.
#6156
Driver
Join Date: Jul 2015
Location: Lost Angeles,Ca
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
went to change my pillow steering wheel today (as im tired of sleeping at the wheel)
was lucky to pickup a black 98 GS300 3 spoke.
&& i ran into the infamous "sub harness 4, air 09082-00760" connector i will need to change the wheel.
will post pictures when i receive the connector.
was lucky to pickup a black 98 GS300 3 spoke.
&& i ran into the infamous "sub harness 4, air 09082-00760" connector i will need to change the wheel.
will post pictures when i receive the connector.
#6158
Driver
Join Date: Jul 2015
Location: Lost Angeles,Ca
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Wheel *****'n out
Swapped out the old pillow "still in great condition" just dislike the look to a new to me 3 Spoke.
Digital dash?
SIKE!
Looking better...
Perforated goodness...
Digital dash?
SIKE!
Looking better...
Perforated goodness...
#6165