sounds like your connection to the switch is bad or the motor is not going into reverse.
when you press it to go down, do you hear anything happening?
if the screw does not move at all, ur right, that would not be a centering issue.
generally if an electric motor spins one way, it should be just fine spinning the other direction when the polarity is reversed. So then i would check the connectors.
If for some reason two seperate motors are used for up and down which seems rather silly to me, it could be either the motor or connection or both.
1995 Lexus SC300 5spd Na-T ( TT Ecu Mod + a few others)
2003 Lexus GX470 AWD (Lifted w/285's on Tundra wheels)
Before doing any business with Lextech Lighting, note they are not a CL vendor.
Please read one of the current review threads about them
Then see current CL vendors for your cluster and lighting services!!!
Wow, I feel ripped off. I read several posts that claim they spent anywhere from .27 cents to .99 cents on garden hose washers. I just spent a whopping 1.99 plus CA. sales tax for a grand total of $2.15. Although there were 10 garden hose washers in the package, I'm still slightly green with envy.
By the way, the fix worked perfectly well. I had a grinding noise when ever I tried to lower my wheel. It eventually got to the point where it would telescope both directions, go up, left and right--and would grind profusely when trying to tilt down.
Carefully pulled everything off and I only needed two washers behind the blue gear. Works well...Thanks c_irie and the rest of CL!!!
DDDDDuuuuddeeeee........thank you so much for this write up. Before I bought my daughters sc300, I knew that the tilt did not work. Bought it, found this site, and baddda bboommm tilt and telescopic working flawlessly. Hardest part was splitting the plastic clam shell.