FuMoFFuTT

iTrader: (2)

I'm looking at some new wheels

Specs are

5x114.3
19x8 in the front
19x9.5 in the rear

But it's the 40 offset that worries me, I don't want the wheels to be sunken in, does anyone have experience with these sizes and offsets on their car?

Pictures are always welcome

zetec2vtec

I have a 10" rim in the rear with a 40 offset and the rim is right at the fender. My fronts are 8.5" wide but with a 24 offset. I think your fronts will need some spacers.

cactusmole

You know there is a whole big thread above for asking questions like this and has a ton of info in there. Your answer is probably in there...

Toshima

I have 19x9f +25 and 19x10r +25. My car is slammed with a lot of camber, and rolled fenders all around. My front are about a 1" sunken in the front and my rears are about 1/2" sunken in. It depends on how low your going. They wont look that bad at all if you have a small drop.

joshthorsc

I use to have 19x8.5(fr) and 19x9.5(r), both with a +38 offset. The fronts had the sunken in look and the backs looked ok, but not quite flushed.

818sc400

they will be sunken. you can fix with spacers tho

lowkeySC

iTrader: (6)

i have 19x8.5+35 front 19x10+35 rear. the rear is flush and rubs the front is still a bit sunk.

Kaydee

40 offset and 9.5 inch wheels will be very sunken

BLK13X

I have 19 F:8.5"/R:9.5" +41mm all round and I absolutely hate them.