Dougspeed

iTrader: (2)

Those are how the Z wheels sit with the stock offsets, no spacers.

acacg

16x8 16x9 MK4 Non turbo wheels. spacers: 15mm front and 25mm rear.

fiasc0

Little brothers is300 wheels temporarily

selvadrift

I have a 1998 SC400 with 98 GS400 17" Chrome wheels. The ones that look much like the IS wheels on the post above mine. Soon to be replaced by some other wheels once I make my choice.

importQ

350z 18s

Kris9884

iTrader: (7)

LOVE the 350z wheel look, they are one of the best OEM upgrades IMO.

187

Anyone have c5 corvette wheels? I'm looking at sets around me and they are 17x8.5 and 18x9.5 and with 25mm spacers all around the offset should work and clear bbk.

t2d2

iTrader: (8)

I think they're 5x4.75" instead of our 5x4.5", but you could get around that with a spacer that also adapts bolt patterns.

187

I should have said adapters instead of spacers I had already done the math and they should fit without any fender problems.

t2d2

iTrader: (8)

Good, just making sure you were aware of the bolt pattern. I haven't seen anyone else use them, but some of the muscle car wheels look quite good on the SC, so I'd love to see what you end up with!

myLEXsc400

any more pics of our cars with the 7 spoke 18" G35 wheels?

myLEXsc400

just picked up a set of 350Z wheels, and getting them powdercoated hypersilver. should be ready to be mounted by next week when my BFG comp2's come in

myLEXsc400

I have a question for everyone running 350Z and G35 wheels. Are you guys using the 60.1 to 66.1 hub centric rings, and are you using any different lug nuts? Please let me know, as I want to make sure I do this right.

ahmedp

l


Hey! So for the 350z wheels I am running aluminum hub centric rings 66.1 to 60.1 also you have to have tuner lugs for these wheels because the stock lug nuts won't sit properly on the groove that is on the wheel. I am using muteki neo chrome but before I ran some plain silver ones because the tire shop I went to sold me those at the time so I could run the wheels on my car.

myLEXsc400

Awesome, thanks. So my hub-rings came in today and i test fitted them on the 18" G35 spare wheels i have and they dont quite fit as snug as i would like on the center bore of those wheels. They are the 66.1 to 60.1 aluminum ones. I understand that the g35 and 350z wheels have the same center bore, so im concerned now.

I also got some 12mmx1.5, Cone Seat, Hex 19, Total Length 41mm, Zinc B-D1 lugs from Otis Inc LA. hope thet\y work just as well as the tuner lugs... they were only $40 shipped